An American National Standard. Secretariat Environmental Industry Associations. Approved February 27, 2008 American National Standards Institute. 77p. This standard establishes requirements to minimize the risk of fire, electrical shock and injury to persons during operation and maintenance of baling equipment for use with wastes and recyclable materials by commercial businesses,...
This standard American Welding Society (AWS). 2005. 68p. This standard shall be for the guidance of educators, ooerators, managers, and supervisors in the safe setup and use of welding and cutting equipment, and the safe performance of welding and cutting operations.
An American National Standard. Approved by the American National Standards Institute (ANSI) March 9, 2012. Secretariat American Welding Society (AWS). Supersedes ANSI Z49.1:2005. 70p. This standard is for the protection of persons from injury and illness and the protection of property (including equipment) from damage by fire and explosions arising from welding, cutting, and...
An American National Standard. American National Standards Institute (ANSI). Approved June 19, 2003. Effective August 19, 2003. 73p. This standard sets forth criteria related to the description, general requirements, testing, marking, selection, care, and use of protectors to minimize or prevent injuries, from such hazards as impact, non-ionizing radiation and chemical type...
Association for the Advancement of Medical Instrumentation(AAMI). Arlington, VA. 2010. 40 p. This recommended practice addresses a broad range of human factors engineering (HFE) topics in a structured format. Examples are provided, as are references to more detailed information. The material emphasizes adoption of a user-centered focus throughout the product design and...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ANSI/ARI Standard 1200-2008. Approved by ANSI on 4 January 2011. 2010. 30p.The purpose of this standard is to establish for Commercial Refrigerated Display Merchandisers and Storage Cabinets: definitions; test requirements; rating requirements; symbols and subscripts; minimum data requirements for...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ANSI/ARI Standard 1200-2008. Approved by ANSI on 4 January 2011. 2010. 30p. The purpose of this standard is to establish for Commercial Refrigerated Display Merchandisers and Storage Cabinets: definitions; test requirements; rating requirements; symbols and subscripts; minimum data requirements for...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by ANSI on Apri 16, 2012. 2011. 18p. The purpose of this standard is to establish for Variable Frequency Drives (VFDs): definitions; classifications; general test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by ANSI on Apri 17, 2012. 2011. 18p. The purpose of this standard is to establish for Variable Frequency Drives (VFDs): definitions; classifications; general test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by ANSI on November 6, 2015. 32 p. This standard applies to the following Equipment: Fan Coil Units, Unit Ventilators, Air Handling Units, Coils, Air-to-Air Heat Exchangers, Vertical Packaged Air Conditioners and Heat Pumps, Packaged Terminal Equipment, Dehumidifiers, Flow and Contaminant Controls, Furnaces,...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by ANSI on Apri 17, 2012. 2011. 27p. The purpose of this standard is to establish for Commercial Refrigerated Display Merchandisers and Storage Cabinets that use secondary refrigerants: definitions; test requirements; rating requirements; symbols and subscripts; minimum data requirements for Published...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by American National Standards Institute (ANSI) on 27 October 2011. 136p. The purpose of this standard is to establish, for Unitary Air-Conditioners and Air-Source Unitary Heat Pumps: definitions; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings;...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 350-2000. 2008. 14p. The purpose of this standard is to establish for Non-Ducted Indoor Air-Conditioning Equipment: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This standard is...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 420-2000. 2008. 30p. The purpose of this standard is to establish for Forced-Circulation Free-Delivery Unit Coolers for Refrigeration: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions....
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 470-2001. 2006. 15p. The purpose of this standard is to establish for Desuperheater/Water Heaters: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This standard applies to...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). 2004. This standard supersedes ARI Standard 540-99.16p. This standard applies to electric motor driven, single and variable capacity positive displacement refrigerant compressors and compressor units. This standard also applies to the presentation of performance data for positive displacement refrigerant compressors and...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 580-2001. Approved by ANSI on 2 August 2010. 2009. 17p.The purpose of this standard is to establish for Non-Condensable Gas Purge Equipment for use with Low Pressure Centrifugal Liquid Chillers: definitions; test requirements; rating requirements; minimum data requirements for Published...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). 2004. This standard supersedes ARI Standard 610-96. 31p. The purpose of this standard is to establish for Central System Humidifiers: definitions; symbols and constants; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings; operating requirements; marking and...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 750-2001. Approved by ANSI on 2007. 11p. The purpose of this standard is to establish for Thermostatic Refrigerant Expansion Valves: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 900-2004. Approved by ANSI on 4 January 2011. 2010. 72p. The purpose of this standard is to establish for Thermal Storage Equipment used for cooling: definitions; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings; operating requirements;...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 910-2006. Approved by ANSI on April 17, 2012. 2011. 40p. The purpose of this standard is to establish for Indoor Pool Dehumidifiers: definitions; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings; operating requirements; marking and...
American Institute of Aeronautics and Astronautics (AIAA). Approved TBD 2008. Revision of G-003B-2004. 139 p. The COSPAR International Reference Atmosphere (CIRA) provides empirical models of atmospheric The COSPAR International Reference Atmosphere (CIRA) provides empirical models of atmospheric temperature and density from 0 km to 2000 km as recommended and adopted by the...
An American National Standard. American Institute of Steel Construction (AISC), Chicago, Illinois, US. 2005. 333 p. This document is a separate consensus standard that addresses one such topic: the design and construction of structural steel and composite structural steel/reinforced concrete building systems for high-seismic applications.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 90p. This Standard specifies design, detailing, fabrication and quality criteria for connections that are prequalified in accordance with the AISC Seismic Provisions for Structural Steel Buildings (herein referred to as the AISC Seismic Provisions) for use with special moment frames (SMF) and intermediate...
An American National Standard. American Institute of Steel Construction (AISC), Chicago, Illinois, US. 2011. 178 p. This Standard specifies design, detailing, fabrication and quality criteria for connections that are prequalified in accordance with the AISC Seismic Provisions for Structural Steel Buildings (herein referred to as the AISC Seismic Provisions) for use with special...
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 519p. This Specification has been based upon past successful usage, advances in the state of knowledge, and changes in design practice. The 2005 American Institute of Steel Construction’s Specification for Structural Steel Buildings for the first time provides an integrated treatment of Allowable Stress...
An American National Standard. American Institute of Steel Construction (AISC). Chicago, Illinois. 2010. Supersedes ANSI/ AISC 360-05. 612p. This Specification shall apply to the design of the structural steel system or systems with structural steel acting compositely with reinforced concrete, where the steel elements are defined in the AISC Code of Standard Practice for Steel...
An American National Standard. American Institute of Steel Construction (AISC), Chicago, Illinois, US. 2012. 100 p. The Specification for Safety-Related Steel Structures in Nuclear Facilities, hereafter referred to as the Nuclear Specification, shall apply to the design of safety-related steel structures, and steel elements in nuclear facilities. The Chapter, Appendix and...
The Association of Pool and Spa Professionals(APSP). Alexandria, VA. USA. Approved by ANSI September 11, 2006. 30 p. This standard covers design and performance criteria for circulation systems including components, devices, and related technology installed to protect against entrapment hazards in residential and public swimming pools, wading pools, spas, hot tubs, and catch...
American National Standards Institute(ANSI), American Society of Heating, Refrigerating and Air-Conditioning Engineers(ASHRAE), Illuminating Engineering Society (IES). 2011. 38 p. This document provides the quantitative (numerical) savings estimate used for DOE’s final determination of energy savings for Standard 90.1-2010. The quantitative savings estimate is obtained by...
American National Standards Institute(ANSI). Door & Access Systems Manufacturers’ Association, International, (DASMA). Approval of the edition as an American National Standard on October 22, 2004. 11 p. This specification for sectional doors, as defined in Section 2, is intended to cover residential and commercial type doors normally used on garages, warehouses, factories, service...
American National Standards Institute(ANSI). Government Electronics and Information Technology Association(GEIA). Approved: September 10, 2007. 34 p. The earned value management system guidelines incorporate best business practices to provide strong benefits for program or enterprise planning and control. The processes include integration of program scope, schedule, and cost...
American National Standards Institute(ANSI). Electrostatic Discharge Association(ESD). Approved August 4, 1999. 18 p. The purpose of this Standard is to provide administrative and technical requirements, as well as guidance for establishing, implementing and maintaining an ESD Control Program (here after referred to as the Program). This document applies to activities that:...
American National Standards Institute(ANSI). Electrostatic Discharge Association(ESD). Approved September 29, 2008. Reaffirmation of ANSI/ESD S541-2003. 25 p. This standard defines the packaging properties needed to protect electrostatic discharge susceptible (ESDS) electronic items through all phases of production, transport and storage. Application requirements are defined that...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 24.02.2011. — 11 p. This standard is intended for testing the resistance of vegetative roof coverings to normal root and rhizome penetration. The test described in this standard has been developed to evaluate the ability of a roofing material to resist normal root or rhizome penetration...
American National Standards Institute(ANSI). International Association for Continuing Education and Training (IACET). 2013. 26 p. The purpose of quality education should be to improve human performance through knowledge, skills and attitudes. This standard is organized around research-based practices that have been proven effective in addressing identified individual,...
An American National Standard. International Code Council (ICC). Approved October 20, 2010. 162p. The technical criteria of this standard make sites, facilities, buildings and elements accessible to and usable by people with such physical disabilities as the inability to walk, difficulty walking, reliance on walking aids, blindness and visual impairment, deafness and hearing...
American National Standards Institute(ANSI). InterNational Committee for Information Technology Standards(INCITS). Approved February 3, 2004. 56 p. This standard consists of two main parts – the RBAC Reference Model and the RBAC System and Administrative Functional Specification. The RBAC Reference Model defines sets of basic RBAC elements (i.e., users, roles, permissions,...
An American National Standard. Instrumentation Systems, and Automation Society (ISA). Second Edition. Supersedes ANSI/ISA-60079-18 (12.23.01)-2005 50p. This part of standard gives the specific requirements for the construction, testing, and marking of electrical apparatus, parts of electrical apparatus and Ex components with the type of protection encapsulation m. This part of...
Instrument Society of America (ISA). July 2007. ISBN: 978-1-934394-47-2. 27p. This document establishes requirements and recommendations for the installation of transducers and auxiliary equipment for nuclear applications outside of the main reactor vessel.
An American National Standard. Instrumentation Systems, and Automation Society (ISA). Approved 17 October 2001. 104p. ISBN: 1-55617-773-
9. This Part 2 standard, in conjunction with ANSI/ISA-95.00.01-2000, Enterprise-Control System Integration Part 1: Models and Terminology, defines the interface content between manufacturing control functions and other enterprise functions. The...
An American National Standard. Instrumentation Systems, and Automation Society (ISA). Approved 6 June 2005. 104p. ISBN: 1-55617-955-
3. This Part 3 standard defines activity models of manufacturing operations management that enable enterprise system to control system integration. The activities defined in this Part 3 standard are consistent with the Part 1 object models...
An American National Standard. International Society of Automation (ISA). Approved 29 October 2007. 95p. ISBN: 978-1-934394-37-3. This standard defines the terminology, concepts and models for industrial automation and control systems (IACS) security. It establishes the basis for the remaining standards in the ISA99 series. To fully articulate the systems and components the...
An American National Standard. Instrumentation Systems, and Automation Society (ISA). Approved 29 October 2007. 102p. ISBN: 978-1-934394-42-
7. This ISA technical report provides a current assessment of various cyber security tools, mitigation counter-measures, and technologies that may effectively apply to the modern electronically based IACSs regulating and monitoring numerous...
American National Standards Institute(ANSI). International Safety Equipment Association(ISEA). Approved April 13, 2010. Revision of ANSI Z87.1-2003. 54 p. This standard sets forth criteria related to the general requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries from such hazards as...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Revision of ANSI/ITSDF B56.10-2005. Date of Issuance: October 27, 2006. 25 p . This Standard defines the safety requirements relating to the elements of design, operation, and maintenance of manually propelled high lift industrial trucks controlled by a walking operator, and intended for use...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Reaffirmation of ASME B56.11.1-1992. 16 p. This Standard establishes dimensional standards for double race or bi-level swivel and rigid industrial casters in order to provide for the overall interchangeability of a complete caster.
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Reaffirmation of ASME B56.11.4-1992. 18 p. The scope of this Standard encompasses standards relative to hook-type fork carriers and the attaching elements of fork arms and load handling attachments for forklift trucks, in relation to manufacturers rated capacities of trucks up to including...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Reaffirmation of ASME B56.11.6-1992. 22 p. This Standard establishes the conditions, procedures, equipment, and acceptability criteria for evaluating visibility from powered industrial trucks. It applies to internal combustion engine powered and electric high lift, counterbalanced, sit-down...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Revision of ANSI/ITSDF B56.11.7-2005. Date of Issuance: August 22, 2011. 12 p. This Standard establishes dimensions for LPG fuel cylinders used on powered industrial trucks. The purpose of this Standard is to promote the interchangeability of 20#, 33.5#, and 43.5# LP-Gas cylinders used on...