American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2008. Published October 2008. 25p. This specification2 covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled steel plate, sheet, and strip, under each of the following specifications issued by ASTM:...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2008. Published October 2008. 25p. This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled steel plate, sheet, and strip, under each of the following specifications issued by ASTM:...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1963. Last previous edition approved in 2006 as A 484/A 484M – 06a. 13 p. This specification covers general requirements that shall apply to wrought stainless steel bars, shapes, forgings, and billets or other semi-finished material (except wire)...
American Society for Testing and Materials (ASTM). Current edition approved Aug. 1, 2006. Published August 2006. Originally approved in 1964. Last previous edition approved in 2004 as A 490 – 04a. 6 p. This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1963. Last previous edition approved in 2004 as A 498 – 04. 3 p. This specification covers external helical, integral
finned, seamless or welded low-carbon steel tubes for use in tubular heat exchangers, surface condensers, evaporators,...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2010. Published November 2010. 6 p. This specification covers cold-formed welded and seamless carbon steel round, square, rectangular, or special shape structural tubing for welded, riveted, or bolted construction of bridges and buildings, and for general structural purposes. This tubing is...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published April 2006. Originally approved in 1964. Last previous edition approved in 2001 as A 503/A 503M – 01 (2001). 3 p. This is an acceptance specification for the ultrasonic inspection of forged steel crankshafts having main bearing journals or crankpins 4 in. [100 mm] or larger in...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 15, 1993. Published February 1994. Originally published as A 504 – 64 to replace A 57 and A
186. Combined with A 25 in this dition. Last previous edition A 504 –
89. Reapproved 1999. 8 p. This specification covers one-wear, two-wear, and multiple-wear wrought carbon steel wheels for locomotives and...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1964. Last previous edition approved in 2000 as A 505 – 00. 11 p. This specification covers a group of common requirements that, unless otherwise specified in the material specification, apply to hot-rolled and cold-rolled alloy steel sheet and...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2005. Published December 2005. Originally approved in 1964. Last previous edition approved in 2004 as A 506 – 04. 4 p. This specification covers hot-rolled and cold-rolled
alloy and structural alloy-steel sheet and strip. Alloy steel is furnished to chemical composition requirements and is...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1964. Last previous edition approved in 2005 as A 507 – 05. 4 p. This specification covers hot-rolled and cold-rolled drawing alloy-steel sheet and strip. Material of this quality is produced principally for applications involving severe cold...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1964. Last previous edition approved in 2005 as A 508/A 508M – 05a. 9 p. This specification covers quenched and tempered vacuum-treated carbon and alloy steel forgings for pressure vessels such as those used in reactor systems. Specifically, it...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published September 2007. Originally approved in 1964. Last previous edition approved in 2006 as A 510 – 06.7 p. This specification covers general requirements for carbon steel wire rods and uncoated coarse round wire in coils or straightened and cut lengths.
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1977. Last previous edition approved in 2003 as A 510M – 03. 7 p. This specification covers general requirements for carbon steel wire rods and uncoated coarse round wire in coils or straightened and cut lengths.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2012. Published April 2012. 11 p. This specification covers seamless stainless tubing for use in mechanical applications where corrosion-resistant or high-temperature strength is needed. The grades covered are listed in Table 1, Table 2, and Table 3. This specification covers seamless...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1964. Last previous edition approved in 2005 as A 512 – 96 (2005). 7 p. This specification covers cold-drawn buttweld carbon steel tubes for use as mechanical tubing. This specification covers round, square, rectangular, and special shape...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2012. Published July 2012. 20 p. This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing. This specification covers mechanical tubing made from hot- or cold-rolled steel. This specification covers round, square, rectangular, and special...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2005. Published October 2005. Originally approved in 1964. Last previous edition approved in 2000 as A 514/A 514M – 00a. 3 p. This specification covers quenched and tempered alloy steel plates of structural quality in thicknesses of 6 in. [150 mm] and under intended primarily for use in welded...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2010. Published November 2010. Originally approved in 1964. Last previous edition approved in 2007 as A515/A515M – 03 (2007). 4 p. This specification covers carbon-silicon steel plates primarily for intermediate- and higher-temperature service in welded boilers and other pressure vessels.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1964. Last previous edition approved in 2005 as A 516/A 516M – 05. 4 p. This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. 13 p. This specification covers several grades of carbon and alloy steel seamless mechanical tubing. The grades are listed in Tables 1-
3. When welding is used for joining the weldable mechanical tube grades, the welding procedure shall be suitable for the grade, the...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2007. Published April 2007. Originally approved in 1964. Last previous edition approved in 2006 as A 522/A 522M – 06. 4 p. This specification covers 8 and 9 % nickel-alloy steel forged or rolled flanges, fittings, valves, and parts intended for use in welded pressure vessels for low-temperature...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1964. Last previous edition approved in 2001 as A 523 – 96 (2001). 5 p. This specification covers seamless and electricresistance-welded steel pipe used as conduit for the installation of high-pressure pipe-type electrical cables in NPS 4 to NPS...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1965. Last previous edition approved in 2001 as A 524 – 96 (2001). 8 p. This specification covers seamless carbon steel pipe intended primarily for service at atmospheric and lower temperatures, NPS 1⁄8 to 26 inclusive, with nominal (average)...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1964. Last previous edition approved in 2004 as A 529/A 529M – 04. 3 p. This specification covers carbon-manganese steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of buildings and for general...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2010. Published November 2010. 22 р. This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN 6 to DN 650], inclusive, with nominal wall thickness as given in Table X2.2 and Table X
2.3. It shall be permissible to furnish pipe having other...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2012. Published April 2012. Originally approved in 1915. Last previous edition approved in 2010 as A53/A53M–10. 23 p. This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN 6 to DN 650], inclusive, with nominal wall thickness as given in...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published April 2006. Originally approved in 1965. Last previous edition approved in 2001 as A 531/A 531M – 91 (2001).5 p. This practice covers the procedures to be followed when performing ultrasonic shear and longitudinal wave tests on -generator retaining rings with an inside diameter...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2008. Published November 2008. Originally approved in 1965. Last previous edition approved in 2003 as A532/A532M – 93a. 4 p. This specification covers a group of white cast irons that have been alloyed to secure high resistance to abrasive wear in the applications of the mining, milling,...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2009. Published August 2009. 5 p. This specification covers castings made of ductile iron, also known as spheroidal or nodular iron, that is described as cast iron with the graphite substantially spheroidal in shape and essentially free of other forms of graphite, as defined in Terminology A644.
American Society for Testing and Materials (ASTM). Current edition approved June 15, 1995. Published August 1995. Reapproved 2000. 4 р. This specification covers heat-treated carbonmanganese-silicon steel plates intended for fusion welded pressure vessels and structures. The maximum thickness of plates furnished under this specification is 4 in. [100 mm] for Class 1 and 6 in....
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1965. Last previous edition approved in 2005 as A 540/A 540M – 05. 8 p. This specification covers regular and special-quality alloy steel bolting materials which may be used for nuclear and other special applications. Bolting materials as used in...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1965. Last previous edition approved in 2004 as A 541/A 541M – 04. 6 p. This specification covers requirements for quenched and tempered carbon and alloy steel forgings for pressure vessel components. All grades are considered weldable under...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2008. Published October 2008. Originally approved in 1965. Last previous edition approved in 2008 as A 554 – 08. 6 p. This specification covers welded stainless steel tubing for mechanical applications where appearance, mechanical properties, or corrosion resistance is needed. The grades covered...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 10, 2003. Published October 2003. Originally approved in 1965. Last previous edition approved in 1998 as A 554 – 98. 6 p. This specification covers welded stainless steel tubing for mechanical applications where appearance, mechanical properties, or corrosion resistance is needed.
American Society for Testing and Materials (ASTM). Current edition approved October 1, 2005. Published November 2005. Originally approved in 1965. Last previous edition approved in 2001 as A 556/A 556M – 96 (2001). 5 p. This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes, if specified, for use in...
American Society for Testing and Materials (ASTM). Current edition approved Aug. 1, 2007. Published August 2007. Originally approved in 1966. Last previous edition approved in 2004 as A 563 – 04a. 8 p. This specification covers chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2004. Published March 2004. 8 р. This specification covers bars and shapes of agehardening stainless steels. Hot-finished or cold-finished rounds, squares, hexagons, bar shapes, angles, tees, and channels are included; these shapes may be produced by hot rolling, extruding, or forging. Billets or...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2005. Published September 2005. Originally approved in 1966. Last previous edition approved in 2005 as A 565 – 05. 4 p. This specification covers hot-finished and cold-finished martensitic chromium steel bars for high-temperature service. The mechanical properties are developed by suitable heat...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published September 2007. Originally approved in 1966. Last previous edition approved in 2006 as A 568/A 568M – 06a. 29 p. This specification covers the general requirements for steel sheet in coils and cut lengths. It applies to the following specifications that describe carbon steel,...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2007. Published March 2007. Originally approved in 1966. Last previous edition approved in 2006 as A 572/A 572M – 06. 4 p. This specification covers five grades of high-strength low-alloy structural steel shapes, plates, sheet piling, and bars. Grades 42 [290], 50 [345], and 55 [380] are intended...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1967. Last previous edition approved in 2000 as A 576 – 90b (2000). 5 p. This specification covers hot-wrought special quality carbon steel bars. Special quality bar applications include forging, heat treating, cold drawing, machining, and many...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. 4 р. This specification covers Stainless steel wire, excert the free-machining types. It includes round, square, octagon, hexagon, and shape wire in coils only for the more commonly used types of stainless steels for general corrosion resistance and high-temperature...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. 3 р. This specification covers hot-finished or cold-finished bars, except bars for forging, suitable for machining processes. It includes rounds, squares, and hexagons in the more commonly used types of stainless free-machining steels designed especially for optimum...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1968. Last previous edition approved in 2001 as A 587 – 96 (2001). 6 p. This specification covers electric-resistance-welded low-carbon steel pipe intended for use as process lines. Pipe ordered under this specification shall be suitable for...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2005. Published April 2005. Originally approved in 1968. Last previous edition approved in 2004 as A 588/A 588M – 04. 3 p. This specification covers high-strength low-alloy structural steel shapes, plates, and bars for welded, riveted, or bolted construction but intended primarily for use in...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published April 2006. Originally approved in 1968. Last previous edition approved in 2001 as A 589 – 96(2001). 12 p. This specification covers four specific types of plain end or threaded and coupled carbon steel pipe for use in water wells.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1969. Last previous edition approved in 2004 as A 595 – 04a. 5 p. This specification covers three grades of seam-welded, round, tapered steel tubes for structural use. GradesAand B are of low-carbon steel or high-strength low-alloy steel...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2007. Published March 2007. Originally approved in 1949. Last previous edition approved in 2006 as A 6/A 6M – 06. 59 p. This general requirements specification covers a group of common requirements that, unless otherwise specified in the applicable product specification, apply to rolled structural...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2004. Published Jan. 2005. 14 р. This specification covers tungsten-type and molybdenum-type high-speed steels available as annealed, hot-rolled bars, forgings, plate, sheet, or strip, and annealed, cold-finished bars or forgings used primarily in the fabrication of tools