American Welding Society (AWS). 2004. 40p. The inspection requirements for the fabrication and welding of steel structures are very extensive. This Pocket Handbook has been developed to provide a useful tool for inspectors to carry in their pockets or tool kits so that selected pertinent portions of the AWS Structural Welding Code—Steel, D1.1/D1.1M:2004, can be easily referenced...
Böhler Schweißtechnik Austria GmbH. Edition 01/2008. 515p. Particulars regarding the appearance and use of our products serve as information for the user. Details of the mechanical properties always refer to the pure weld metal in accordance with the applicable standards. The parent metal, the welding position and the welding parameters amongst other things affect the weld metal...
This European Standard was approved by CEN on 13 August 2000, and amendment A1 was approved by CEN on 20 November 2003. 32p. This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless steels are given in annexes A to D.
The International Organization for Standardization (ISO). The text of ISO 12100:2010 has been approved by CEN as a EN ISO 12100:2010 without any modification. The European Standard EN ISO 12100-2010 has the status of a British Standard. 2010. 90p. This International Standard specifies basic terminology, principles and a methodology for achieving safety in the design of...
The International Organization for Standardization (ISO). Supersedes EN 12345:1998. The text of ISO 17659:2002 has been approved by CEN as EN ISO 17659:2004 without any modifications. June 2004. 62p. This International Standard describes by pictorial representation most of the more common terms, in English, French and German, for types of joints, joint preparation and welds.
This European Standard was approved by CEN on 4 June 2004. Supersedes ENV 1991-2-4:1995. Incorporating corrigendum January 2010. 149 p. This European Standard gives guidance on the determination of natural wind actions for the structural design of building and civil engineering works for each of the loaded areas under consideration. This includes the whole structure or parts of...
The International Organization for Standardization (ISO). 2003. This document supersedes EN 288-1:1992. 18p. This Standard is part of a series of standards. Annex A gives details of this series of standard, annex B gives a flowchart for the use of these standards and Annex C gives a flow diagram for the development and qualification of a WPS. This standard defines general rules...
Submitted to: U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration Office of Pipeline Safety, Michael Baker Jr., Inc. November 2008. — 78 p. This study presents an overview of the corrosion threat to gas and liquid pipelines, focusing on the prevention, detection, characterization, and management of internal and external corrosion, primarily...
National Aeronautics and Space Administration (NASA). 2008. 342 p. This handbook provides useful information on cost estimating for the entire NASA Cost Estimating Community. It is to be both informative for the new NASA cost estimator and a good reference document for the experienced NASA cost estimator. Based on the extensive feedback from the NASA Cost Estimating Community,...
Минск, Стандартинформ. 2010. Межгосударственный стандарт. 70 стр. Настоящий стандарт идентичен международному стандарту ISO/IEC 17025:2005 «General requirements for the competence of testing and calibration laboratories». Настоящий стандарт устанавливает общие требования к компетентности лабораторий в проведении испытаний и/или калибровки, включая отбор образцов, испытания и...
Москва, Стандартинформ. 2011. Национальный стандарт Р,Ф. 40 стр. Дата введения - 2011-01- 01. Настоящий стандарт является модифицированным по отношению к международному стандарту ISO 16812:2007 "Petroleum and natural gas industries - Shell-and-tube heat exchangers. Настоящий стандарт устанавливает требования к конструкции, материалам, изготовлению, контролю, испытаниям и...
Екатеринбург: Tatlin, 2011. — 124 с. — (Archi text ura). — ISBN: 978-5-903433-49-0. В новой книге собраны статьи, основанные на интервью с ведущими западными архитекторами. Среди многочисленных тем, обсуждаемых в интервью, основной была тема взаимоотношения архитектуры и контекста. Книга иллюстрирована фотографиями автора. Фрэнк Гери: портрет на фоне рыбы. Ричард Мейер: белая...
Министерство Регионального развития Российской Федерации, Москва, 2012 99 стр. Настоящий свод правил следует соблюдать при проектировании, строительстве, реконструкции, капитальном ремонте, расширении и техническом котельных, работающих на любом виде топлива, с общей установленной мощностью 360 кВа и более с паровыми, водогрейными и пароводогрейными котлами, с давлением пара не...
American Petroleum Institute (API) Third Edition, December 2003. 112p. This standard is under the jurisdiction of API Subcommittee 13, Drilling and Completion Fluids. This API standard is a modified aboption of the English version of ISO 10414-1:2001.
American Petroleum Institute (API) Second Edition, February 1998. 236p. Core analysis, like other technical areas, is continually evolving so that both methodology and costs are changing. The recommended practices provided here represent a snap shot in time of the consensus advice of a large international committee.
American Petroleum Institute (API). Twentieth Edition October 2010, Effective Date April 1.2011. 448 p. This International Standard specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of...
American Petroleum Institute (API). Fourth Edition. 132p. The purpose of this standard is to provide requirements that can serve as a guide for installation and testing of blowout prevention equipment systems on land and marine drilling rigs (barge, platform, bottom-supported, and floating). A blowout preventor system is comprised of a combination of various components. The...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B1.3М-1992. Date of Issuance: October 12, 2007. 22 р. This Standard presents screw thread gaging systems suitable for determining the acceptability of UN, UNR, UNJ, M, and MJ screw threads on externally and internally threaded products. It establishes the criteria for screw thread...
NY: The American Society of Mechanical Engineers, 2003. — 86 p. An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ANSI B18.2.1-1991. Date of Issuance: October 8, 1999. 86 p. This Standard covers the complete general and manufacturer and the purchaser. dimensional data for eight product types of inch series square and hex. bolts and...
This European Standard was approved by CEN on 30 June 2006. This document supersedes EN 10083-2:1991. 40p. This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for:
- semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006, Clause 1),
- bars (see NOTE 2 in EN 10083-1:2006, Clause 1),
- rod,
-...
This European Standard was approved by CEN on 14 April 2005. Supersedes EN 10088-1:1995. 42p. This European Standard lists the chemical composition of stainless steels, which are subdivided in accordance with their main properties into corrosion resisting steels, heat resisting steels and creep resisting steels and specified in the European Standards given in Table 1.
This European Standard was approved by CEN on 25 November 2006. 134p. This European Standard gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations including those for the liquefaction, storage, vaporisation, transfer and handling of LNG.
The International Electrotechnical Commission (IEC). First edition, 2003-01. 88p. This International Standard gives requirements for the specification, design, installation, operation and maintenance of a safety instrumented system, so that it can be confidently entrusted to place and/or maintain the process in a safe state. This standard has been developed as a process sector...
Deutsches Institut für Normung (DIN). December 2006. 11p. This standard applies to undercuts on turned parts and in bores, and helps reduce the variety of tools needed to produce such undercuts.
New York, NY. Basel, Switzerland. Marcel Dekker, Inc. 2000. 520p. ISBN: 0-8247-8589-
4. The Handbook reflects codes, regulations and standards in manufacturing, installation, and specification of storage tank systems. In addition, it is recommended that all applicable standards be checked for details that may affect an individual project. For best results, development of...
Los Alamos National Laboratory (LANL). Rev. 2, 3.10.2009. 168p. This Guide provides information for the proper application of the ASME B31.3 Code "Process Piping, It was last updated for the 2002 edition. ASME B31.3 applies to process piping and tubing systems at Los Alamos National Laboratory. This Guide also contains ASME B31.1 and AWWA compliant Piping Specifications. Guide...
Gulf Professional Publishing is an imprint of Elsevier 30 Corporate Drive, Suite 400, Burlington, MA 01803, US. 2005. AISBN: 0-7506-7743-0. 356p. The Piping Material Selection Guide for Process Systems, as the title states, is a guide for the piping engineer who is faced with the challenge of choosing the correct piping materials of construction.
Москва, Стандартинформ. 2010. Национальный стандарт Р,Ф. 58 стр. Дата введения - 2011-07-
01. Настоящий стандарт устанавливает виды, структуру, содержание и порядок оформления проектных документов на разработку нефтяных, газонефтяных, нефтегазовых и нефтегазоконденсатных месторождений и требования к ним. Настоящий стандарт предназначен для применения при составлении, экспертизе,...
ОАО Институт Гипростроймост. Москва, 2009. Взамен СТП 136-
99. Дата введения: 2010-05-31. 307 стр. Стандарт устанавливает нормы и правила проектирования вспомогательных сооружений и устройств, применяемых для строительства (а также реконструкции, капитального ремонта и технического перевооружения) мостов (в том числе путепроводов, виадуков, эстакад и пешеходных мостов) во всех...
Некоммерческое партнерство "Инновации в электроэнергетике" (НП "ИНВЭЛ"). Филиал ОАО «Инженерный центр ЕЭС» - «Фирма ОРГРЭС». Москва, 2009. Дата введения 2010-01-29. 168 стр. Стандарт распространяется на установки турбинные паровые стационарные мощностью от 6 до 1200 МВт, с номинальной частотой вращения ротора 50 с в минус первой степени, предназначенные для привода...
Некоммерческое партнерство "Инновации в электроэнергетике" (НП "ИНВЭЛ"). Всероссийский теплотехнический научно-исследовательский институт (ОАО "ВТИ"). Филиал ОАО "Инженерный центр ЕЭС" - "Фирма ОРГРЭС". Москва, 2009. Дата введения 2010-01-29. 496 стр. Стандарт распространяется на вновь проектируемые и модернизируемые системы контроля и управления теплоэнергетическим оборудованием...
ОАО "Газпром". Москва 2009. Дата введения - 2009-12-30. 378 стр. Настоящий стандарт распространяется на опасные производственные объекты ОАО «Газпром», в том числе линейную часть магистральных газопроводов (включая газопроводы-отводы), переходы через протяженные водные преграды (подводные газопроводы), компрессорные станции, газораспределительные станции, линейную часть и насосные...
American Petroleum Institute (API) Second Edition, November 2010. 114p. This Recommended Practice addresses the special needs of valves and their accessories in control and safety instrumented system (SIS) applications for refinery services. The knowledge and experience of the industry has been captured to provide proven solutions to well-known problems
American Petroleum Institute (API). First Edition, August 2009. Errata 1: October 2009. 228 p. This part of ISO 10407 specifies the required inspection for each level of inspection (Tables B.1 through B.15) and procedures for the inspection and testing of used drill stem elements. For the purpose of this part of ISO 10407, drill stem elements include drill pipe body, tool joints,...
An American National Standard. American Petroleum Institute (API) Forty-fourth Edition, October 1, 2007, Effective Date: October 1, 2008. Errata, January 2009. Addendum, February 2009. 176p. This International Standard is the result of harmonizing the requirements of the following standards: - API Spec 5L; - ISO 3183-1:1996; - ISO 3183-2:1996; - ISO 3183-3:1999. This Standard...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B1.13M-2001. 82p. This Standard contains general metric standards for a 60 deg symmetrical screw thread with a basic ISO 68-1 profile designated M profile. The M profile threads of tolerance class 6H/6g are intended for metric applications where inch class 2A/2B have been used. At...
This European Standard was approved by CEN on 3 November 2003. 98p. This European Standard specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries.
The International Organization for Standardization (ISO). The text of ISO 17663:2009 has been approved by CEN as a EN ISO 17663:2009 without any modification. This British Standard is the UK implementation of EN ISO 17663:2009. 20p. This International Standard provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site...
The International Organization for Standardization (ISO). First edition. 2003-12- 15. This first edition of ISO 9692-1 cancels and replaces ISO 9692:1992 which has been technically revised. This European Standard was approved by CEN on 8 December 2003. Supersedes EN ISO 29692:1994. The European Standard EN ISO 9692-1:2003 has the status of a British Standard. 28p. This part of...
Всероссийский научно-исследовательский и проектно-конструкторский институт нефтяного машиностроения (ОАО «ВНИИнефтемаш»). 2004. 24 стр. Настоящий альбом распространяется на сдвоенные аппараты теплообменные кожухотрубчатые с плавающей головкой: теплообменники «Т», холодильники «Х», конденсаторы «К» типа «П» и кожухотрубчатые с U-образными трубами: теплообменники «Т» типа «U» и их...
Федеральное агентство по техническому регулированию и метрологии. Москва. Стандартинформ. 2012. 31 стр. Национальный стандарт Российской Федерации. Настоящий стандарт идентичен международному стандарту ISO 16834:2006 Welding consumables -Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels – Classification. Степень соответствия –...
Заменён ГОСТ Р 54795-2011/ISO/DIS 9712 с 01.01.2013. Приказ Росстандарта N 1117-ст от 13.12.2011. Москва, Стандартинформ. 2010. Национальный стандарт Р,Ф. 29 стр. Дата введения – 2011-01- 01. Настоящий стандарт идентичен международному стандарту ISO 9712:2005 Nondestructive testing – Qualification and certification of personal. Настоящий стандарт устанавливает требования к...
Москва. Недра. 1974 г. Издание второе, переработанное и дополненное. 321 стр. Рассмотрены конструкции большепролетных выработок, дан их расчет, указаны пути облегчения этих конструкций; описаны методы модельных и натурных исследований подземных конструкций и окружающего массива породы; приведены примеры исследований; рассмотрены способы проходки крупных подземных выработок и...
В настоящем каталоге приведены импортные и отечественные аналоги сварочных материалов для ручной дуговой сварки, автоматической сварки под флюсом и сварки в защитных газах. Каталог позволяет выбрать основные и сварочные материалы других зарубежных фирм, не включенных в настоящий документ, по типам материалов приведенных в каталоге, при этом необходимо соблюдать требования,...
Российская ассоциация экспертных организаций техногенных объектов повышенной опасности (Ростехэкспертиза). Москва. 2005. 14 стр. Настоящий стандарт распространяется на центробежные и винтовые насосные и компрессорные агрегаты с приводом от электродвигателей и/или паровых турбин с редукторами или мультипликаторами, а также вентиляторы, дымососы, воздуходувки и аппараты воздушного...
Разработан ассоциацией "Высоконадежный трубопроводный транспорт", РАО "Газпром",
АО "Роснефтегазстрой", ВНИИСТом, ВНИИгазом, Институтом электросварки им. Е.О.Патона,
ПО "Спецнефтегаз" при участии фирмы "CRC-EVANS" (США). Утвержден РАО "Газпром" (Приказ от 11.09.1996г. № 44). 79 стр. Требования к выполнению сварочно-монтажных работ и контроля кольцевых сварных соединений,...
Американский нефтяной институт (API). Издание второе, декабрь 2005 г. Перевод на русский язык. 22 стр. Настоящий документ обеспечивает руководящие указания для восстановления толстостенных задвижек изготовленных из углеродистой стали, ферритового сплава, нержавеющей стали и никелевого сплава. Указания, содержащиеся в данном документе применимы к арматуре с фланцами и под приварку...
An American National Standard, American Petroleum Institute (API). Draft. Twenty-fourth Edition. 50p. This standard replaces API Specification 10A, 23rd edition. This standard shall become effective on the date printed on the cover but may be used voluntarily from the date of distribution. This standard is considered identical to the English version of ISO 10426-
1. In this...
American Petroleum Institute (API) Seventh Edition, October 1989, Reaffirmed 1999. 84p. Covers minimum requirements for the design, fabrication, and plant testing of oil and gas separators and oil-gas-water separators that are used in the production of oil and gas, and are located at some point on the producing flow line between the wellhead and pipeline.
An American National Standard. The American Society of Mechanical Engineers (ASME). Date of Issuance: January 31, 1995. 83p. This Code is applicable to the followingty pes of reclosing and non-reclosing pressure relief devices: (a) pressure relief valves (b) rupture disk devices (Part I only) (c) breakinglshear pin devices (Part I only), and (d) fusible plug devices (Part I...