ASTM Standards Volume 02.02 Aluminum and Magnesium Alloys
Сборник стандартов Американского общества по испытаниям и материалам – ASTM. Сборник содержит 220 стандартов по алюминиевым и магниевым сплавам. Стандарты содержат изменения, дополнения, замены по состоянию на 2004 год. Текущие изменения, естественно, отсутсутствуют. Только для информации и ознакомления
This European Standard was approved by CEN on 20 February 2003. 28p. This European Standard specifies requirements for flat products for pressure equipment made of weldable nonalloy and alloy steels with elevated temperature properties as specified in Table 1.
The requirements and definitions of EN 10028-1 also apply.
This European Standard was approved by CEN on 21 December 1997. 12p. This part of this European Standard specifies requirements for the nominal dimensions of hot-rolled equal and unequal leg angles. This European Standard does not apply to angles with square roots. These requirements do not apply to equal and unequal leg angles rolled from stainless steel. Tolerances for equal and...
This European Standard specifies the design, construction, equipment, operational and water treatment requirements drawn up with a view to ensuring the operating safety of new stationary shell boiler plants.
This Part of the European Standard specifies requirements for the inspection during construction, documentation and marking of shell boilers as defined in EN 12953-1
This European Standard was approved by CEN on 16 June 2011. The European Standard EN 287-1:2011 has the status of a British Standard. This document supersedes EN 287-1:2004. 44p. This European Standard defines the qualification testing of welders for the fusion welding of steels. It provides a set of technical rules for a systematic qualification test of the welder, and enables...
The International Organization for Standardization (ISO). The text of the International Standard from Technical Committee ISO/TC 5, Ferrous metal pipes and metallic fittings, of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee ECISS/TC 29, Steel tubes and fittings for steel tubes, the secretariat of...
The International Organization for Standardization (ISO). Second edition, 2006-10-01. 22p. This International Standard identifies the quality-related responsibilities and tasks included in the coordination of welding-related activities. In any manufacturing organization, welding coordination can be undertaken by one or a number of persons. Welding coordination requirements can...
The McGraw-Hill Companies, Inc. New York Chicago San Francisco. 2005. 287p. Contents: Piping History; Historical Development; Metrication; Materials; Design; Flexibility Design; Pipe Support; Listed and Unlisted Components; Fabrication; Inspection, Examination, and Testing; Special Considerations for Pipelines; Special Considerations for Other Pipe Systems
This European Standard was approved by CEN on 8 July 2004. Supersedes ENV 1992-1-2:1995. Incorporating corrigendum July 2008. 99 p. This Part 1-2 of EN 1992 deals with the design of concrete structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1992-1-1 and EN 1991-1-
2. This part 1-2 only identifies differences from, or...
This European Standard was approved by CEN on 25 April 2005. Supersedes ENV 1992-2: 1996. Incorporating corrigendum July 2008. 97 p. Part 2 of Eurocode 2 gives a basis for the design of bridges and parts of bridges in plain, reinforced and prestressed concrete made with normal and light weight aggregates.
This European Standard was approved by CEN on 23 April 2004. Supersedes ENV 1993-1-1:1992. Incorporating corrigenda December 2005 and April 2009. 37 p. This part of EN 1993 gives methods for the assessment of joints subjected to fatigue loading. These methods are derived from fatigue tests with large scale specimens, that include effects of geometrical and structural imperfections...
This European Standard was approved by CEN on 9 January 2006. Supersedes ENV 1993-3-1:1997. Incorporating corrigendum July 2009. 82 p. This Part 3.1 of EN 1993 applies to the structural design of lattice towers and guyed masts and to the structural design of this type of structures supporting prismatic, cylindrical or other bluff elements. (AC1) Provisions for self-supporting and...
American Petroleum Institute (API) Voting Version, September 2011. First Edition, 1st quarter 2012. 371p. This recommended practice specifies requirements and gives recommendations for design, operating, maintenance, and troubleshooting considerations for industrial fired boilers that are used in refineries and chemical plants. It covers waterside control, combustion control,...
Association Connecting Electronics Industries (IPC) and Wire Harness Manufacturers Association (WHMA). July 2006. Supersedes IPC/WHMA-A-620-2002. 372 p. This standard is a collection of visual Quality Acceptability Requirements for Cable, Wire and Harness Assemblies. It was prepared by the ITGC Industry Technical Guidelines Committee of the Wire Harness Manufacturers...
Москва, Стандартинформ. 2011. Национальный стандарт Р,Ф. 32 стр. Дата введения - 2011-01- 01. Настоящий стандарт модифицированным и включает в себя идентичные основные нормативные положения международного стандарта ISO 9606-1:1994 Approval testing of welders - Fusion welding - Part 1: Steels и европейского стандарта EN 287-1:2004 "Qualification test of welders - Fusion welding...
Владимирский государственный университет. Владимир 2007. 161 стр. Учебное пособие к выполнению курсовых и дипломных проектов по специальности 151001. Изложены экономические, организационные и управленческие основы машиностроительного производства, даются оценка и методика обоснования экономической части дипломного проекта технологического направления. Предназначено для...
Российская ассоциация экспертных организаций техногенных объектов повышенной опасности (Ростехэкспертиза). Москва. 2006. 235 стр. Настоящий руководящий нормативный документ устанавливает общие положения, порядок проведения технического обслуживания, ремонта, обследования, анализа промышленной безопасности производственных зданий и сооружений предприятий и организаций,...
Министерство Регионального развития Российской Федерации, ОАО "НИЦ Строительство", Москва, 2012. Дата введения 2013-01-01. 161 стр. Настоящий свод правил распространяется на проектирование бетонных и железобетонных конструкций зданий и сооружений различного назначения, эксплуатируемых в климатических условиях России, в среде с неагрессивной степенью воздействия.
ОАО "Гипрокислород". Москва, 2006. Дата введения: 2006-12-
20. Взамен ОСТ 290.004-02. 77 стр. Настоящие Правила распространяются на проектирование строительства новых объектов, реконструкцию и техническое перевооружение действующих производств продуктов разделения воздуха (кислород, азот, аргон, криптон, ксенон, гелий и смеси на их основе), сооружений и устройств по их приему,...
ЗАО "Центральный ордена Трудового Красного Знамени научно-исследовательский и проектный институт строительных металлоконструкций им. Мельникова" (ЗАО "ЦНИИПСК им. Мельникова"). ОАО Научно-исследовательский и проектный институт "Пром стальконструкция" ("НИПИпромстальконструкция"). Москва, 2004. Дата введения: 2005-01-01. 22 стр. Настоящий стандарт распространяется на проектирование...
Некоммерческое партнерство "Инновации в электроэнергетике" (НП "ИНВЭЛ"). Филиал ОАО "Инженерный центр ЕЭС" - "Фирма ОРГРЭС". Москва, 2009. Дата введения 2009-06-19. 40 стр. Настоящий стандарт распространяется на оборудование водогрейных котельных установок при сжигании газообразного, жидкого или твердого топлива. Устанавливает основные методы и нормы организации эксплуатации и...
Некоммерческое партнерство "Инновации в электроэнергетике" (НП "ИНВЭЛ"). ОАО "Энергетический институт им. Г.М.Кржижановского". ЗАО "Научно-производственный центр малой энергетики". Москва, 2009. Дата введения 2009-08-31. 99 стр. Настоящий стандарт организации является нормативным документом, устанавливающим нормы и требования к проектированию и строительству ветроэлектростанций...
Некоммерческое партнерство "Инновации в электроэнергетике" (НП "ИНВЭЛ"). ОАО "НТЦ электроэнергетики". Москва, 2009. Дата введения 2009-07-20. 124 стр. Настоящий стандарт определяет нормы и требования по организации эксплуатации и технического обслуживания силовых кабельных линий различного конструктивного исполнения классов напряжений от 0,4 до 35 кВ на основе кабелей с...
ОАО «Газпром». ОсОО «Научно-исследовательский институт природных газов и газовых технологий - ВНИИГАЗ». Дата введения 2009-04-15. 67 стр. Настоящий стандарт устанавливает порядок проведения работ по продлению срока безопасной эксплуатации магистральных газопроводов ОАО «Газпром». Положения настоящего стандарта предназначены для использования дочерними обществами и организациями...
American Petroleum Instltute (API) Eighth Edition, May 1995. 34p. This standard covers the design, construction, and location of liqueЮed petroleum gas (LPG) installations at marine and pipeline terminals, natural gas processing plants, reЮneries, petrochemical plants, or tank farms.
Американский нефтяной институт (API). Издание шестое, сентябрь 2004 г. Перевод на русский язык. 20 стр. Данный стандарт распространяется на конструкцию, материалы, строительные размеры, параметрические ряды давление-температура и на требования по контролю, внешнему осмотру и испытаниям для обратных затворов
Technomic Publishing Company, Inc., Lancaster, Pennsylvania, U.S.A. 2000. 253 р. ISBN: No. 1-56676-832- 2. This book is about "Engineering Economics" which is a subset of microeconomics. It covers the economics and financial analyses needed to assess the viability of projects and to choose the best among many. As such it is relevant not only to engineers but also to anyone who...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2011. Published December 2011. Originally approved in 1948. Last previous edition approved in 2011 as A320/A320M–11. 8 p. This specification covers alloy steel bolting for pressure vessels, valves, flanges, and fittings for low-temperature service. See Specification A962/A962M for the definition of...
American Welding Society (AWS). 2004. 32p. Compiled as a useful tool for on-the-job welding personnel by an AWS Product Development Committee. Contents: Nomenclature of Groove Joint Details; Square-groove weld; Single-V-groove weld; Double-V-groove weld; Single-U-groove weld; Single-bevel-groove weld; Double-bevel-groove weld; Single-U-groove weld; Double-U-groove weld;...
This European Standard was approved by CEN on 3 September 1999. 54p. This European Standard specifies the requirements for flat products for pressure purposes made of stainless steels, including austenitic creep resisting steels, in thicknesses as indicated in Tables 6 to 9.
The requirements in EN 10028-1 also apply.
This European Standard was approved by CEN on 5 September 1999. 24p. This Part of this European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of ferritic and martensitic steels with specified elevated temperature purposes
This European Standard was approved by CEN on 11 April 2008. 208p. This document supersedes ENV 1090-1:1996, ENV 1090-2:1998, ENV 1090-3:1997, ENV 1090-4:1997, ENV 1090-5:1998 and ENV 1090-6:2000. This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from: - hot rolled, structural steel products...
This Part of this European Standard specifies requirements for safety related equipment for shell boilers as defined in EN 12953-1, irrespective of the degree of supervisions.
This European Standard was approved by CEN on 23 May 2002. Amendment A1 was approved by CEN on 12 May 2005. 18p. This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials (but initially restricted to steel) with a view to ensure safe operation.
The International Organization for Standardization (ISO). The text of ISO 17632:2004 has been approved by CEN as a EN ISO 17632:2008 without any modification. The European Standard EN ISO 17632:2008 has the status of a British Standard. 34p. This International Standard specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal...
The International Organization for Standardization (ISO). First edition. 2000-12- 15. The text of ISO 179-1:2000 has been approved by CEN as EN ISO 179-1:2000/A1:2005 without any modifications. The European Standard EN ISO 179-1:2000, with the incorporation of amendment A1:2005, has the status of a British Standard. 28p. This part of ISO 179 specifies a method for determining...
Diese Europäische Norm wurde vom CEN am
18. September 2003 angenommen. Deutsche Fassung. 10p. Diese Europäische Norm legt die Nennmaße, Grenzabmaße und Formtoleranzen für warmgewalzte Rundstäbe aus Stahl fest.
This European Standard was approved by CEN on 9 January 2006. Supersedes ENV 1991-2-7: 1998. Incorporating corrigendum February 2010. 69 p. This part of EN 1991 provides strategies and rules for safeguarding buildings and other civil engineering works against identifiable and unidentifiable accidental actions. EN 1991-1-7 defines: - strategies based on identified accidental...
This European Standard was approved by CEN on 20 June 2003. Supersedes ENV 1993-1-1: 1992. Incorporating Corrigenda December 2005 and March 2009. 19 p. This part of EN 1993 contains design guidance for the selection of steel for fracture toughness and for through thickness properties of welded elements where there is a significant risk of lamellar tearing during fabrication
This European Standard was approved by CEN on 13 January 2006. Supersedes ENV 1993-2:1997. Incorporating corrigendum April 2009. 37 p. EN1993-1 11 gives design rules for structures with tension components made of steel, which, due to their connections with the structure, are adjustable and replaceable see Table 1.1. This standard also gives rules for determining the technical...
This European Standard was approved by CEN on 12 June 2006. Supersedes ENV 1993-4-1: 1999. Incorporating corrigendum April 2009. 117 p. Part 4.1 of Eurocode 3 provides principles and application rules for the structural design of steel silos of circular or rectangular plan-form, being free standing or supported. This part is concerned only with the requirements for resistance...
ESAB AB. Goteborg, Sweden. 2008. 92 p. A complete range of welding and cutting equipment, filler materials and accessories for the stainless steel industry.
Association Connecting Electronics Industries. Joint Industry Standard (IPC). February 2005. Supersedes Revision IPC-SM-782A-1999. 92 p. This document provides information on land pattern geometries used for the surface attachment of electronic components. The intent of the information presented herein is to provide the appropriate size, shape and tolerance of surface mount land...
Manufacturers Standardization Society (MSS). 2006. 15 p. This Standard Practice covers essential dimensions, finish, tolerances, testing, marking, material, and minimum strength requirements for 90 degree integrally reinforced forged branch outlet fittings of buttwelding, socket welding, and threaded types. . Fittings manufactured to this Standard Practice are designed to make...
11th edition. — Lysaker, Norway: Wilhelmsen Ships Service. — 552 p. Welding and Related Processes for Repair and Maintenance Onboard. The purpose of the Welding Handbook for maritime welders is to provide guidance in modern welding and related processes and to provide the welder with a source of practical information on the right solution to specific onboard welding problems.
Москва, Стандартинформ. 2011. Национальный стандарт РФ. 16 стр. Дата введения - 2011-01-01. Настоящий стандарт распространяется на факельные установки, используемые на производствах нефте- и газоперерабатывающей, химической, нефтехимической промышленности и на других опасных производственных объектах, связанных с обращением и хранением веществ, способных образовывать паро- и...