An American National Standard, American Petroleum Institute (API). Fourth Edition, XXX 2010. 188p. This standard is considered identical to the English version of ISO 13628-5:2009. This part of ISO 13628 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and...
An American National Standard. American Petroleum Institute (API). Third Edition, July 2008. Effective Date: January 1, 2009. 85p. This Standard 13628 defines the technical requirements for safe, dimensionally and functionally interchangeable flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for the design,...
American Petroleum Institute (API) Fifth Edition, January 2002. 19p. This specification covers the fabrication of structural steel pipe formed from plate steel with longitudinal and circumferential butt-welded seams, typically in sizes 14 in. outside diameter (OD) and larger (40 in. and larger for LWDS) with wall thickness 3/8 in. and greater (up to a nominal 40 ft in length)...
American Petroleum Institute (API). Seventh Edition. Ballot 1. 146p. This specification provides requirements for design, construction, and testing of new offshore pedestal-mounted cranes. For the purposes of this specification, offshore cranes are defined as pedestal-mounted elevating and rotating lift devices for transfer of materials or personnel to or from marine vessels,...
American Petroleum Institute (API). First Edition,December 2006. Effective Date: June 2007. 26p. This specification covers two grades of high strength steel plate for use in welded construction of offshore structures, in selected critical portions which must resist impact, plastic fatigue loading, and lamellar tearing. Grade 50 is covered in thicknesses up to 6 in. (150 mm)...
American Petroleum Institute (API) Third Edition, January 2008. 56p. This specification states requirements and gives recommendations for suitable steel structures for drilling and well-servicing operations in the petroleum industry, provides a uniform method of rating the structures, and provides two PSLs.
American Petroleum Institute (API). XXX Teenth Edition, June 2010. 71p. This Specification covers dimensions, tolerances and marking requirements for API threads and the gauges that control the
acceptance criteria for the threads. Thread element gauges, instruments and requirements for the inspection of threads for line pipe, round thread casing, and buttress casing connections...
An American National Standard, American Petroleum Institute (API). Draft. Ninth Edition. 279p. This standard replaces API Specification 5CT Eighth Edition. This standard shall become effective on the date printed on the cover but may be used voluntarily from the date of distribution. This standard is considered identical to the English version of ISO 11960.
American Petroleum Institute (API). Seventh Edition October 1. 2001, Effective Date April 1.2002. 124p. This International Standard specifies the technical delivery conditions for steel pipes (casing, tubing, plain and casing lines and pup-joints) and accessories. This International Standard is applicable to the following connections in accordance with ISO 10422 or API Spec 5B:...
American Petroleum Institute (API). Eighth Edition July 1. 2005, Effective Date January 1.2006. 306 p. This International Standard specifies the technical delivery conditions for steel pipes (casing, tubing, plain-end casing liners and pup joints), coupling stock and accessories and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The...
American Petroleum Institute (API). Ninth Edition, July 2011, Effective Date January 1, 2012. 284 p. This Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for...
API Spec 5CT-2011 Обсадные и насосно-компрессорные трубы. Технические условия Американский нефтяной институт (API). Издание девятое, июль 2011 г. Дата введения: 1 января 2012 г. Перевод на русский язык. 287 стр. Данный стандарт устанавливает технические условия поставки стальных труб (обсадных, насосно-компрессорных и укороченных труб), трубных заготовок для муфт, заготовок для...
An American National Standard. American Petroleum Institute (API). First Edition, August 2009, Effective Date August 1, 2010. 122 p. This Standard specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification...
An American National Standard. American Petroleum Institute (API) Forty-fourth Edition, October 1, 2007, Effective Date: October 1, 2008. 162p. This International Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas...
Американский нефтяной институт (API). Издание сорок четвертое, 1 ноября 2007 г. Дата введения: 1 октября 2008 г. Перевод на русский язык. 162 стр. Целью настоящих технических условий является создание стандарта на трубы, используемые для транспортировки газа, воды и нефти в нефтегазодобывающей и перерабатывающей промышленности. Настоящий Стандарт устанавливает требования к двум...
American Petroleum Institute (API) Forty-second Edition, July 2000. 168p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
American Petroleum Institute (API) Forty-third Edition, March 2004, Effective Date: October 2004. 171p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
Американский нефтяной институт (API). Издание сорок третье, март 2004 г. Дата введения: 4 октября 2004 г. Перевод на русский язык. 196 стр. Целью настоящих технических условий является создание стандарта на трубы, используемые для транспортировки газа, воды и нефти в нефтегазодобывающей и перерабатывающей промышленности. Настоящие техусловия распространяются на стальные...
An American National Standard. American Petroleum Institute (API) Forty-fourth Edition, October 1, 2007, Effective Date: October 1, 2008. Errata, January 2009. Addendum, February 2009. 176p. This International Standard is the result of harmonizing the requirements of the following standards: - API Spec 5L; - ISO 3183-1:1996; - ISO 3183-2:1996; - ISO 3183-3:1999. This Standard...
Американский нефтяной институт (API). Издание сорок четвертое, 1 октября 2007 г. Дата введения: 1 октября 2008 г. Перевод на русский язык выполнен переводческой фирмой «Интерсервис». 162 стр. Целью настоящих технических условий является создание стандарта на трубы, используемые для транспортировки газа, воды и нефти в нефтегазодобывающей и перерабатывающей промышленности....
An American National Standard, American Petroleum Institute (API). Draft. First Edition. 40p. This standard shall become effective on the date printed on the cover but may be used voluntarily from the date of distribution. This standard is considered identical to the English version of ISO 15590-1
American Petroleum Institute (API). Twentieth Edition October 2010, Effective Date April 1.2011. 448 p. This International Standard specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of...
American Petroleum Institute (API). First Edition February 1. 1996. Reaffirmed April 2008. 24 p. The purpose of this specification is to establish requirements to:
a. Verify the basic PR1 standard service SSVAJSV valve design.
b. Verify the basic SSVAJSV actuator design.
c. Verify the basic PR2 sandy service SSVNSV valve design.
d. To demonstrate the verification testing...
An American National Standard. American Petroleum Institute (API). Twenty-Third Edition , April 2008. Addendum 2, August 2011. 106p. This Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the...
Американский институт нефти. 22 издание. Введено 01.06.2002. С поправкой от 01.03.2005. 71 стр. Перевод на русский язык. Этот стандарт определяет требования и дает рекомендации по конструкции, изготовлению, испытанию и документации шаровых кранов, обратных клапанов, задвижек и пробковых кранов для применения в трубопроводных системах, соответствующих требованиям ISO 13623 для...
American Petroleum Institute (API). Twenty-Sixth Edition, May 2011, Effective Date November 1, 2011. 64 p. This standard specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries. The following products are covered by this specification: - wire rope, -...
An American National Standard. American Petroleum Institute (API). First Edition, November 2001. 86p. This standard is applicable to pipeline systems used to transport hazardous liquids as defined in Title CER
195.2. The use of this standard is not limited to pipelines regulated under Title 49 CFR 195.1, and the principles embodied in integrity management are applicable to all...
American Petroleum Institute (API). First Edition, August 2005. 50p. This Standard covers the use of in-line inspection systems for onshore and offshore gas and hazardous liquid pipelines. This includes, but is not limited to, tethered or free flowing systems for detecting metal loss, cracks, mechanical damage, pipeline geometries, and pipeline location or mapping, The Standard...
American Petroleum Institute (API). First Edition, September 2004. 60p. This standard on SCADA security provides guidance to the operators of Oil and Gas liquid pipeline systems for managing SCADA system integrity and security. The use of this document is not limited to pipelines regulated under Title 49 CFR 195.1, but should be viewed as a listing of best practices to be employed...
American Petroleum Institute (API) Fifth Edition, June 2001. 30p. The following definitions are applicable to underground tank lining and inspection as described in this standard.
American Petroleum Instltute (API) Third Edition, January 1982. 18p. This standard covers the normal and emergency venting requirements for aboveground liquid petroleum storage tanks and aboveground and belowground refrigerated storage tanks designed for operation at pressures form 1/2 ounce per square inch vacuum through 15 pounds inch gage.
American Petroleum Institute (API) Sixth Edition, August 2001. 58p. This standard is applicable to cleaning stationaru atmospheric and lov-pressure (up to and including 15 psig) aboveground petroleum storage tanks used in all sectors of the petroleum and petrochemical industry, including crude oil and gas production, refineries, petrochemical plants, bulk plants and terminals.
American Petroleum Institute (API). Third Edition. 77p. The purpose of this standard is to assist owners and contractors in developing, improving and maintaining their mutual safety programs. Widely diverse contractor functions and uses may include resident, non-resident, long-term and short-term contractors. These have in common the need for effective safety programs to protect...
American Petroleum Instltute (API) Eighth Edition, May 1995. 34p. This standard covers the design, construction, and location of liqueЮed petroleum gas (LPG) installations at marine and pipeline terminals, natural gas processing plants, reЮneries, petrochemical plants, or tank farms.
American Petroleum Instltute (API) Ninth Edition, June 2006. 20p. This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure-relieving devices protecting these vessels.
American Petroleum Instltute (API) Fifth Edition, January 2007. 202p. This International Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied natural gas (LNG) facilities and oil and gas production facilities.
Американский нефтяной институт (API). Издание пятое, июнь 2002 г. Перевод на русский язык. 50 стр. Настоящий стандарт является спецификацией для заказа стальной предохранительной арматуры с фланцами. Основными требованиями, предъяляемыми к пружинным предохранительным клапанам пямого действия и управляемойпредохранительным клапанам непрямого действия, являются следующие: а....
American Petroleum Instltute (API) Fifth Edition, June 1995. 23p. This standard is a purchase speciЮcation for Яanged steel pressure relief valves. Basic requirements are given for direct spring-loaded pressure relief valves and pilot-operated pressure relief valves.
American Petroleum Institute (API). Fourth Edition. 132p. The purpose of this standard is to provide requirements that can serve as a guide for installation and testing of blowout prevention equipment systems on land and marine drilling rigs (barge, platform, bottom-supported, and floating). A blowout preventor system is comprised of a combination of various components. The...
American Petroleum Institute (API). Third Edition, May 2001. 208p. This standard covers the minimum requirements for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters, fans and burners for general refinery service. A fired heater is an exchanger that transfers heat from the combustion of fuel to...
ANSI/API STANDARD 560 FOURTH EDITION, AUGUST 2007,ISO 13705:2006 (Identical), 276p, This International Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters, fans and burners for general refinery service.
Американский нефтяной институт (API). Издание шестое, сентябрь 2004 г. Перевод на русский язык. 20 стр. Данный стандарт распространяется на конструкцию, материалы, строительные размеры, параметрические ряды давление-температура и на требования по контролю, внешнему осмотру и испытаниям для обратных затворов
Американский нефтяной институт (API). Издание восьмое, май 2004 г. Перевод на русский язык. 15 стр. Настоящий стандарт охватывает вопросы технического осмотра, испытания, дополнительного испытания и требований к гидравлическим испытаниям на герметичность клапанов с упругим седлом, с неметаллическим седлом (т.е. керамическим) и седлом на металлическом контакте следующих типов:...
American Petroleum Institute (API). Seventh Edition, October 1996. 14 p. This standard covers inspection, examination, supplementary examinations, and pressure test requirements for resilient-seated, nonmetallic-seated (for example, ceramic), and metal-to-metal-seated valves of the gate, globe, plug, ball, check, butterfly types. Resilient seats are considered to be: a. soft...
API STANDARD 600 TENTH EDITION, FEBRUARY 1997, 28p. This standard covers steel gate valves with flanged or butt-welding ends in sizes NPS 1 througn NPS
24. These sizes correspond to nominal pipe sizes in ASME B36.10M.
An American National Standard. American Petroleum Institute (API). Eleventh Edition, October 2001. 47p. This Standard specifies the requirements for a heavy duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions indicate a need for full port openings, heavy wall sections and extra large...
American Petroleum Institute (API). Tenth Edition 20xx, Effective Date 20xx. 68 p. This standard specifies the requirements for a series of compact gate, globe and check valves for petroleum and natural gas industry applications. It is applicable to valves of: — nominal pipe sizes NPS 1/4, NPS 3/8, NPS 1/2, NPS 3/4, NPS 1, NPS 1 1/4, NPS 1 1/2, NPS 2, NPS 2 1/2, NPS 3, and NPS...
American Petroleum Instltute (API) Fifth Edition, Draft. 2013. 19 p. This standard specifies the requirements for metal ball valves suitable for petroleum, petrochemical and industrial applications that have: — flanged ends in sizes DN 15 through DN 600 ( NPS 1/2 through NPS 24); — butt-welding ends in sizes DN 15 through DN 600 (NPS 1/2 through NPS 24); — socket-welding ends...
American Petroleum Instltute (API). 12TH Edition, 1st Draft 30 May 2014 . 208 p. This Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This Standard is applicable to overhung pumps, between-bearings pumps and vertically suspended...
American Petroleum Institute (API). Fourth Edition, June 1995. 98 p. This standard covers the minimum requirements for special purpose steam turbines for petroleum, chemical, and gas industry services. These requirements include basic design, materials, and related lube-oil systems, controls, and auxiliary equipment.