An American National Standard. Approved by the American National Standards Institute (ANSI) June 24, 2004. The American Society of Mechanical Engineers (ASME). New York, NY. Date of Issuance: April 29, 2005. 366p. Rules for the Process Piping Code Section B31.3 have been developed considering piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper,...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2008. Published October 2008. 7 р. This specification covers hot-finished or cold-finished bars except bars for reforging . It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. The...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published June 2006. 12 p. This practice describes a system for classifying mineral and organo-mineral soils for engineering purposes based on laboratory determination of particle-size characteristics, liquid limit, and plasticity index and shall be used when precise classification is required.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2011. Published June 2011. 12 p. The primary objective of metallographic examinations is to reveal the constituents and structure of metals and their alloys by means of a light optical or scanning electron microscope. In special cases, the objective of the examination may require the development of...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published June 2006. 11 p. This guide identifies factors relevant to the quality of language translation services for each phase of a translation project. The guide is intended for use by all stakeholders, with varying levels of knowledge in the field of translation. This guide is designed...
This standard American Welding Society (AWS). 1992. 31p. This specification prescribes requirements for the classification of covered stainless steel electrodes for shielded metal arc welding. Chromium content of weld metal deposited by these electrodes is not less than 10.5 percent and the iron content exceeds that of any other element. For purposes of classification, the iron...
This European Standard was approved by CEN on 23 May 2002. 58p. This Part of this European Standard specifies the requirements for materials (including metallic clad materials) for industrial piping and supports covered by EN 13480-1 manufactured from of metallic materials. It is currently limited to steels with sufficient ductility. This Part of this European Standard is not...
The International Organization for Standardization (ISO). The text of ISO 17638:2003 has been approved by CEN as a EN ISO 17638:2009 without any modification. This document supersedes EN 1290:1998. This British Standard is the UK implementation of EN ISO 17638:2009. 22p. This International Standard specifies techniques for detection of surface imperfections in welds in...
This European Standard was approved by CEN on 18 March 2010. 26 p. This International Standard specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or absence of imperfections...
CRC Press LLC, 2003. 258 p. ISBN: 0-8493-1681- 2. Substructure Design addresses the various substructure components: bearings, piers and columns, towers, abutments and retaining structures, geotechnical considerations, footing and foundations, vessel collisions, and bridge hydraulics. Bearings; Piers and Columns; Towers; Abutments and Retaining Structures; Geotechnical...
Det Norske Veritas (DNV). April 2010. 142p. This Recommended Practice presents recommendations in relation to fatigue analyses based on fatigue tests and fracture mechanics. Conditions for the validity of the Recommended Practice are given in section 1.
This European Standard was approved by CEN on 1 September 2002. Supersedes ENV 1991-2-2:1995. Incorporating corrigendum March 2009. 61 p. The methods given in this Part 1-2 of EN 1991 are applicable to buildings, with a fire load related to the building and its occupancy. This Part 1-2 of EN 1991 deals with thermal and mechanical actions on structures exposed to fire. It is...
This European Standard was approved by CEN on 16 January 2006. Supersedes ENV 1993-1-3:1996. Incorporating corrigendum November 2009. 133 p. This part of EN 1993 EN 1993-1-3 design requirements for cold-formed members and sheeting. It applies to cold-formed steel products made from coated or uncoated hot or cold rolled sheet or strip, that have been cold-formed by such processes...
This European Standard was approved by CEN on 9 January 2006. Supersedes ENV 1993-1-4:1996. 37 p. This Part 1.4 of EN 1993 gives supplementary provisions for the design of buildings and civil engineering works that extend and modify the application of EN 1993-1 1, EN 1993-] EN J 993-1-5 and EN 1993-1-8 to austenitic, austenitic-ferritic and ferritic stainless steels.
This European Standard was approved by CEN on 23 April 2004. Supersedes ENV 1998-1-1:1994, ENV 1998-1-2:1994, ENV 1998-1-3:1995. 232p. EN 1998 applies to the design and construction of buildings and civil engineering works in seismic regions. Its purpose is to ensure that in the event of earthquakes: − human lives are protected; − damage is limited; and − structures important...
ESAB AB. Goteborg, Sweden. — 27 p. Friction Stir Welding is a solid-state process, which means that the objects are joined without reaching melting point. This opens up whole new areas in welding technology. Using FSW, rapid and high quality welds of 2xxx and 7xxx series alloys, traditionally considered unweldable, are now possible
The International Electrotechnical Commission (IEC). Version 4.0 05/12/97. 58p. This international standard covers those aspects to be considered when electrical/electronic/programmable electronic systems (E/E/PESs) are used to carry out safety functions. A major objective of this standard is to facilitate the development of application sector international standards by the...
Association Connecting Electronics Industries (IPC). May 2003. 22 p. This standard establishes the generic and specific guidelines for the design of metallic conductors in organic printed boards and other material that may be homogeneous, reinforced, or used in combination with inorganic materials
National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2002. 28p. ISBN 1-57590-142-
0. This standard is applicable to carbon steel pipeline systems used to transport natural gas, hazardous liquids including anhydrous ammonia, carbon dioxide, water including brine, liquefied petroleum gases (LPGs), and other services that are not detrimental to the function...
The Norwegian Oil Industry Association (OLF) and Federation of Norwegian Manufacturing Industries (TBL). Draft 1 for Rev. 2, March 2005. 18р. This NORSOK standard presents a method for calculation of corrosion rates in hydrocarbon production and process systems where the corrosive agent is CO 2 .
Москва, Стандартинформ. 2014. Национальный стандарт Р,Ф. 20 стр. Дата введения – 2013-12- 01. Настоящий стандарт является модифицированным по отношению международному стандарту ISO 10816-2:2009 «Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating...
М.: Стандартинформ, 2008. — 40 с. Заменен ГОСТ Р ИСО/МЭК 15408-1-2012 с 01.12.2013. Дата введения – 2009-10-01. Настоящий стандарт идентичен международному стандарту ISO/IEC 15408-1:2005 Information technology - Security techniques – Evaluation criteria for IT security - Part 1: Introduction and general model. Настоящий стандарт предназначен для использования в качестве основы...
ОАО Научно-исследовательский и конструкторский институт химического машиностроения (ОАО "НИИХиммаш"). Дата введения: 2006-01-01. 25 стр. Стандарт устанавливает режимы горячей штамповки и термообработки днищ эллиптических из сталей и сплавов, применяемых в химическом машиностроении и других отраслях промышленности, и определяет усилия пресса, потребные для штамповки днищ
ЗАО Центральный ордена Трудового Красного Знамени научно-исследовательский и проектный институт строительных металлоконструкций им. Мельникова (ЗАО «ЦНИИПСК им. Мельникова»). ОАО Проектный институт нефтеспецстройпроект (ОАО ПИ Нефтеспецстройпроект). ОАО Институт по монтажным и специальным строительным работам (ОАО ВНИИМонтажспецстрой). Москва. Дата введения 2004-01-30. 33 стр....
Федеральное агентство по атомной энергии. Открытое акционерное общество "Концерн по производству электрической и тепловой энергии на атомных станциях"(ОАО "Концерн Энергоатом"). Открытое акционерное общество "Всероссийский научно-исследовательский институт по эксплуатации атомных электростанций" (ОАО "ВНИИАЭС"). Дата введения 2009-10-29. 39 стр. Руководство распространяется: -...
Введ. 01-03-2006. — М.: Информационно-рекламный центр газовой промышленности, 2006. — 41 с. Разработан: ООО "Газнадзор" и ООО "ИРЦ Газпром". Настоящий стандарт устанавливает: - классификацию по категориям и видам нормативных документов для проектирования, строительства и эксплуатации объектов ОАО "Газпром"; - правила разработки и утверждения стандартов ОАО "Газпром" в области...
ОАО "Газпром". ОАО "Газпроектинжиниринг". 2008. Дата введения 2009-02-24. 35 стр. Настоящий стандарт устанавливает правила проведения монтажных и пусконаладочных работ по оснащению объектов ОАО «Газпром» техническими средствами охраны и антитеррористической защиты при новом строительстве, расширении, реконструкции и техническом перевооружении действующих предприятий, а также при...
ОАО "Газпром". ООО Институт ВНИИСТ. Дата введения 2007-09-22. 248 стр. Настоящий стандарт распространяется на сварку кольцевых сварных соединений труб, соединительных деталей трубопроводов, а также запорной и распределительной арматуры при строительстве магистральных газопроводов, изготовленных из трубных сталей с нормативным значением временного сопротивления разрыву 588 МПа (60...
ОАО "Газпром". ОАО «Оргэнергогаз», ЗАО НПЦ «Молния», ООО СЛ «Трубнадзор», ООО «ВНИИГАЗ – СеверНИПИгаз», ООО НПК «Диаконт». Дата введения 2004-12-01. 51 стр. Настоящая методика устанавливает методы контроля, объем, порядок и требования к проведению технического диагностирования, обработке и оформлению результатов контроля. Методика распространяется на технологические подземные и...
ОАО "Газпром". Дата введения 2005-02-11. 26 стр. Настоящий нормативный документ применяется при проектировании, строительстве и эксплуатации систем газового лучистого и газового воздушного отопления для производственных и общественных зданий и помещений предприятий и объектов газовой отрасли.
American National Standards Institute(ANSI), American Society of Heating, Refrigerating and Air-Conditioning Engineers(ASHRAE), Illuminating Engineering Society (IES). 2011. 38 p. This document provides the quantitative (numerical) savings estimate used for DOE’s final determination of energy savings for Standard 90.1-2010. The quantitative savings estimate is obtained by...
American Petroleum Institute (API). Second Edition. 43 p. This document provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations. NOTE: Proppants mentioned henceforth in this document refer to sand, ceramic media, resin-coated proppants, gravelpacking media and other materials used for hydraulic fracturing and...
American Petroleum Institute (API) Third Edition, May 2001, Reaffirmed March 2007. 42p. Recommendations set forth in this publication apply to oil and gas well drilling and servicing operations involving hydrogen sulfide. These operations include well drilling, completion, servicing, workover, downhole maintenance, and plug and abandonment procedures conducted with hydrogen...
American Petroleum Institute (API) First Edition, November 1997. 141p. The purpose of this recommended practice is to provides guidelines for classifying locations Class I, Zone 0, Zone 1, and Zone 2 locations at petroleum facilities for the selection and installation of electrical equipment.
American Petroleum Instltute (API) First Edition, May 1991. 68p. The procedures for installation of the instruments covered in this recommended practice are based on experience with and evaluation of many installations.
American Petroleum Institute (API). First Edition, September 2005. 84p. Specifically this document will address in depth the question of how the user measures (multiphase) flow rates of oil, gas, water, and any other fluids that are present in the effluent stream of a single well. This requires the definition not only of the methodology which is to be employed, but also the...
American Petroleum Institute (API). First Edition, November 2008. 86p. The purpose of these recommended practices is to provide information that can serve as a guide for planning, installation, operation and testing of underbalanced drilling equipment systems on land and offshore drilling rigs
[barge, platform, bottom-supported, and floating with surface blowout preventers (BOP)...
American Petroleum Institute (API). First Edition, July 2002. Effective Date: January, 2003. 35p. This Standard provides requirements for packers and bridge plugs for use in the petroleum and natural gas industry. Application of this International Standard is limited to those products meeting the definition of a packer or bridge plug intended for petroleum and natural gas industry...
American Petroleum Institute (API) Second Edition, March 2002. Effective Data, January 2005. 110p. These specifications establish design standards for systems, that are used to control blowout preventers (BOPs) and associated valves that control well pressure during drilling operations.
An American National Standard. American Petroleum Institute (API). Twenty-Third Edition , April 2008. Addendum 2, August 2011. 106p. This Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the...
An American National Standard. The American Society of Mechanical Engineers (ASME). Revision of ASME B31.4-2006. Date of Issuance: March 24, 2010. 132 р. This Code prescribes requirements for the design, materials, construction, assembly, inspection, and testing of piping transporting liquids between production facilities, tank farms, natural gas processing plants, refineries,pump...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 15, 2013. Published February 2014. Originally approved in 1978. Last previous approved in 2013 as E647 – 13. 50 p. This test method covers the determination of fatigue crack growth rates from near-threshold to Kmax controlled instability. Results are expressed in terms of the crack-tip...
Approved by the American National Standards Institute April 4, 2008, 40 p. This standard is a tool for communication between a purchaser and a supplier of welding consumables within quality systems as might, for example, be based upon ISO 9001. This standard, together with an AWS, ISO, or other recognized welding consumable standard, provides a method for preparing those...
This European Standard was accepted by CEN on 27 November 1989. 14p. This Part of this European Standard describes the Charpy impact test (U and V-notch) for metallic materials. For certain particular metallic materials and applications, the Charpy impact test may be the subject of specific standards and particular requirements.
This amendment Al modifies the European Standard EN 10130:1991, it was approved by CEN on 1 May 1998. Supersedes EN 10130:1991. 16p. This European Standard applies to cold-rolled non-coated low-carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unless otherwise agreed at the time of the order, equal to or...
This European Standard was approved by CEN on 3 September 1999. 20p. This part of this European Standard specifies the technical delivery conditions of forgings for pressure purposes made of stainless steels, including creep resisting steels.
This European Standard was approved by CEN on 2 October 2002. 32p. This Part of EN 10305 specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section for precision applications.
This European Standard was approved by CEN on 10 March 2000. 20p. This European Standard applies to water-tube boilers with volumes in excess of 2 litres for the generation of steam and/or hot water at an allowable pressure greater than 0,5 bar and with a temperature in excess of 110 °C as well as auxiliary installations (other plant equipment).
The International Organization for Standardization (ISO). Second edition. 2002-11- 01. The text of ISO 2560:2002 has been approved by CEN as EN ISO 2560:2005 without any modifications. The European Standard EN ISO 2560:2005 has the status of a British Standard. 40p. This International Standard specifies requirements for classification of covered electrodes and deposited metal...
This European Standard was approved by CEN on 13 January 2006. Supersedes ENV 1993-1-5:1997. Incorporating corrigendum April 2009. 55 p. EN 1993-1-5 gives design requirements of stiffened and unstiffened plates which are subject to inplane forces. Effects due to shear lag, in-plane load introduction and plate buckling for I-section girders and box girders are covered. Also...