Пер. с англ. — М.: Мир, 1975. — 162 с. Книга написана специалистом в области теории управления поведением упругих систем. Она представляет собой первую попытку систематизированного изложения и дальнейшего исследования общих математических постановок, решений и анализа задач об оптимальном управляемом демпфировании или возбуждении колебаний упругих стержней и пластин на основе...
Учеб. пособие. — СПб.: ПГУПС, 2017. — 76 с. В учебном пособии изложен теоретический материал дополнительных глав теоретической механики для студентов, изучающих дополнительные главы теоретической механики. При написании пособия использован современный математический аппарат теории колебаний. На простых примерах показано применение основных положений теории малых колебаний к...
Учебное пособие. — Вологда: ВоГТУ, 2005. — 107 с. Рассмотрены вопросы математического моделирования движения машин и их агрегатов с учетом упругости звеньев. Пособие предназначено для студентов машиностроительных специальностей ВУЗов. Предисловие Введение Условия динамического нагружения кривошипно-ползунного механизма Колебательные процессы, сопровождающие работу механизмов и...
М.: Физматлит, 2001. — 320 с. — ISBN: 5-9221-0172-2. В монографии с единых методических позиций теории волновых процессов излагаются физико-математические основы динамики упругих систем с движущимися границами и нагрузками. Рассматриваются качественно различные случаи проявления эффекта Доплера и излучение волн в упругих направляющих равномерно движущимися нагрузками. Подробно...
Pergamon Press, 1977. — 573 p. This book is intended to provide a comprehensive treatment of the fundamental aspects of conduction, convection, and radiation at an introductory level. While emphasis has been placed on careful and complete theoretical developments, numerous solved example problems and design problems have been included in order to illustrate the practical...
CRC Press, 2022. — 179 p. This book serves as a preliminary reference for the principles of thermal radiation and its modelling in computational fluid dynamics (CFD) simulations. Radiation Heat Transfer Modelling with Computational Fluid Dynamics covers strategies and processes for synthesizing radiation with CFD setups, computational techniques for solving the radiative...
Изд. 2-е испр. и доп. — М.: Металлургия, 1971. — 440 с. Первое издание было выпущено в 1958 г. под названием «Теплообмен излучением в металлургических печах и топках котлов». В настоящем издании рассмотрены физические основы излучения, лучистый обмен между телами, теория поля и дифференциальные методы исследования явлений излучения. Описаны методы расчета лучистого теплообмена...
Свердловск: Металлургиздат, 1958. — 371 с. В книге на основе новейших литературных данных и теоретических работ автора излагаются вопросы теории и расчета излучения в металлургических печах и топках паровых котлов. Книга предназначается для инженеров производственников и научных работников, работающих в области металлургической теплотехники и энергетики, и может быть полезной...
Перевод с англ. — М.: Мир, 1975. — 935 с. В книге систематически изложены основы теории теплообмена излучением, включая последние достижения науки в этой области знания. Рассмотрены фундаментальные законы, определяющие перенос излучения, радиационные свойства веществ, а также различные методы расчета теплообмена излучением. По широте охвата материала это наиболее полная из...
Пер. с англ. — М.: Мир, 1985. — 368 с., ил. Монография написана известными американскими учеными. В русском переводе выпускается в двух книгах. Книга 2 содержит материал по новым направлениям развития интерактивной машинной графики. Рассматриваются архитектуры современных векторных и растровых дисплеев, алгоритмы растровой развертки и закраски, удаления скрытых поверхностей и...
Пер. с англ.— М.: Мир, 1985.— 368 с., ил. Монография написана известными американскими учеными. В русском переводе выпускается в двух книгах. Книга 1 посвящена классической векторной графике. Рассмотрены устройства ввода и вывода графической информации, методы реализации и применения простого графического пакета, организация графического диалога и математические аспекты...
Пер. с англ. — М.: Мир, 2001. — 604 с., ил. — ISBN 5-03-002143-4. Полностью переработанное и дополненное второе издание книги известных американских специалистов (перевод первого издания вышел в издательстве «Машиностроение» в 1980 г.). Книгу отличает глубина и фундаментальность материала, четкий и лаконичный стиль изложения, удачное сочетание строгости подхода с практической...
Пер. с англ. — М.: Мир, 1989. — 512 с., ил. Книга известного американского специалиста, знакомого советским читателям по переводу его «Математических основ машинной графики» (М.: Машиностроение, 1980). Новая книга содержит анализ алгоритмов и методов современных графических систем, особое внимание уделено методам растровой графики. Алгоритмы доведены до программ на псевдокоде,...
Учебное пособие. — М.: МИРЭА – Российский технологический университет, 2021. — 126 с. Учебное пособие разработано в помощь студентам, выполняющим практические работы по дисциплинам «Компьютерное моделирование», «Геометрическое моделирование в компьютерной графике». В состав пособия входят краткий теоретический материал о геометрических преобразования в однородных координатах;...
Springer, 2022. — 201 p. This book aims at providing a computational framework of radiative heat transfer in participating media. The book mainly helps engineers and researchers develop their own codes for radiative transfer analysis, starting from simple benchmark problems and extending further to industry scale problems. The computations related to radiative heat transfer are...
4th edition — Pearson, 2014 — 824 pages. Assuming no background in computer graphics, this junior- to graduate-level textbook presents basic principles for the design, use, and understanding of computer graphics systems and applications. The authors, authorities in their field, offer an integrated approach to two-dimensional and three-dimensional graphics topics. A...
3rd edition — Prentice Hall, 2003 — 912 pages. Reflecting the rapid expansion of the use of computer graphics and of C++ as a programming language of choice for implementation, this book converts all programming code into the C++ language. This new edition is a complete revision, bringing the text up to date with current advances in computer graphics technology and...
Учебное пособие. — Самара: Самарский государственный аэрокосмический университет, 2002. — 80 с. Рассматриваются собственные и вынужденные колебания стержней постоянного сечения. Излагается вариационный принцип Гамильтона, методика определение частот и форм собственных колебаний стержней переменного сечения, стержней с присоединенным жестким грузом с использованием методов...
CRC Press, 2017. — 388 p. — ISBN 9781498746137. This book presents the fundamentals of nonlinear mechanics within a modern computational approach based mainly on finite element methods. Both material and geometric nonlinearities are treated. The topics build up from the mechanics of finite deformation of solid bodies through to nonlinear structural behaviour including buckling,...
М.: Физматлит, 2002. — 208 с. — ISBN 5-9221-0294-Х. Монография содержит изложение теоретико-волнового подхода к изучению динамических процессов в одномерных упругих системах. Из вариационного принципа Гамильтона-Остроградского выведены уточненные уравнения колебаний стержней при наличии геометрической и физической нелинейностей. Подробно проанализированы дисперсионные,...
Springer, 2006. — 522 p. Plasticity and Geotechnics is the first attempt to summarize and present in a single volume the major achievements in the field of plasticity theory for geotechnical materials and its applications to geotechnical analysis and design. The book emerges from the author’s belief that there is an urgent need for the geotechnical and solid mechanics community to...
Harvard University Press, 1952. — 192 p. Amazon customer review: "The book is very nicely written. The historical brief is nicely put together. But it is a bit short. I want to have more coverage. It was sad to learn that Prof. Westergaard passed away after he finished this book. Otherwise, we will have more wonderful books from him. Overall, it is a nice book."
Springer, 2018. — 104 p. This volume demonstrates the use of FORTRAN for numerical computing in the context of the finite element method. FORTRAN is still an important programming language for computational mechanics and all classical finite element codes are written in this language, some of them even offer an interface to link user-code to the main program. This feature is...
Springer, 1993. — 279 p. This book develops calculations of irreversible or plastic deformation for an elementary structural component on the basis of simple constitutive models. These models represent various aspects of material behavior by means of equations developed from a theory; e.g. elasticity, plasticity or viscoplasticity. The constitutive models are formulated by...
Cambridge University Press, 2004. — 760 p. Отсутствует страница 597. Providing a basic foundation for advanced graduate study and research in the mechanics of solids, this treatise develops systematically the fundamentals of finite inelastic deformations of heterogeneous materials. The book combines the mathematical precision of solid mechanics with the physics-based...
CRC Press, 2012. — 784 pp. Born out of 15 years of courses and lectures on continuum mechanics, nonlinear mechanics, continuum thermodynamics, viscoelasticity, plasticity, crystal plasticity, and thermodynamic plasticity, The Mechanical and Thermodynamical Theory of Plasticity represents one of the most extensive and in-depth treatises on the mechanical and thermodynamical aspects...
The Macmillan Company, 1979. — 302 p. The purpose of this course is to present, in condensed form, the methods of the theory of plasticity and especially of Limit Analysis and Design, with emphasis on problems pertaining to civil engineering. The reader is assumed to know elementary calculus, as well as Mechanics of Materials and the elements of Mechanics of Continua.
Alpha Science Intl Ltd, 2008. — 200 p. Introduction to Engineering Plasticity covers the mathematical theories of plasticity that are based on hypotheses and assumptions to represent the experimental observations as generalized mathematical formulations. Following a brief introduction in the first chapter, the next three chapters of the book deal with stress and strain tensors,...
Wiley, 2012. — 440 pp. Comprehensive introduction to finite elastoplasticity, addressing various analytical and numerical analyses & including state-of-the-art theories. Introduction to Finite Elastoplasticity presents introductory explanations that can be readily understood by readers with only a basic knowledge of elastoplasticity, showing physical backgrounds of concepts in...
CRC Press, 2015. — 602 p. Most undergraduate programs lack an undergraduate plasticity theory course, and many graduate programs in design and manufacturing lack a course on plasticity—leaving a number of engineering students without adequate information on the subject. Emphasizing stresses generated in the material and its effect, Plasticity: Fundamentals and Applications...
1967. – 614 pp. This book is meant to present the main problems considered in the theory of dynamic deformation of plastic bodies. While it was the author's intention to present as many such problems as possible or at least to mention such prolems in a more or less detailed manner, special emphasis was laid on those problems that are more closely linked with the author's interest...
Academic Press, 1989. — 273 p. In this book, the author examines mathematical aspects of finite element methods for the approximate solution of incompressible flow problems. The principal goal is to present some of the important mathematical results that are relevant to practical computations. In so doing, useful algorithms are also discussed. Although rigorous results are stated,...
CRC Press, 2017. — 343 p. This book covers finite element methods for several typical eigenvalues that arise from science and engineering. Both theory and implementation are covered in depth at the graduate level. The background for typical eigenvalue problems is included along with functional analysis tools, finite element discretization methods, convergence analysis, techniques...
Springer, 1992. — 187 p. Professor Sluzalec is a well-known and respected authority in the field of Computational Mechanics, and his personal experience forms the basis of the book. Introduction to Nonlinear Thermomechanics provides both an elementary and advanced exposition of nonlinear thermomechanics. The scope includes theoretical aspects and their rational application in...
Springer, 1981. — 167 p. In structure mechanics analysis, finite element methods are now well established and well documented techniques; their advantage lies in a higher flexibility, in particular for: (i) The representation of arbitrary complicated boundaries; (ii) Systematic rules for the developments of stable numerical schemes approximating mathematically wellposed...
Prentice-Hall of India Pvt.Ltd, 2012. — 340 p. Designed for a one semester course in finite element method, this compact and well organized text presents FEM as a tool to find approximate solutions to differential equations.
University of Colorado, 2000. — 306 p. Element Stiffness Matrix Stiffness Method; Part I: Orthogonal Structures Transformation Matrices Stiffness Method; Part II Equations Of Statics And Kinematics Flexibility Method Special Analysis Procedures Review Of Elasticity Variational And Energy Methods Interpolation Functions Finite Element Formulation Some Finite Elements Dynamic...
2015. — 197 p. "If you haven’t been hiding under a stone during your studies of Engineering, Mathematics or Physics, it is very likely that you have already heard about the Finite Element Method. Maybe you even know some theoretical and practical aspects and have played a bit with FEM software. What you are going to find here is a detailed and mathematically biased introduction...
University of Colorado, 2001. — 334 p. Prerequisite Fundamental Relations Mesh Generation Variational And Rayleigh-Ritz Methods Interpolation Functions; Natural Coordinate Systems Finite Element Discretization And Requirements Straight Sided Elements; 1st Generation Isoparametric Elements; 2nd Generation Element Formulation And Strain Recovery In Hw Formulation Weighted...
Springer, 1991. — 227 p. Finite Element Programs for Structural Vibrations presents detailed descriptions of how to use six computer programs (written in Fortran 77) to determine the resonant frequencies of one, two, and three-dimensional skeletal structures through the finite element method. Chapter 1 is on "The Finite Element Method" and Chapter 2 demonstrates, with the aid of...
Albion, 1996. — 217 p. This advanced undergraduate and postgraduate text serves for courses in many engineering disciplines and professionals in industrial or academic research. It is written in a step-by-step methodological approach so that readers can acquire knowledge, either through formal engineering courses or by self-study. Also useful for industrial engineers as a...
Albion, 1996. — 637 p. Bridging the gap between theoretical texts and the massive and expensive software packages, this handbook covers finite element programming in a wide range of problems in mechanical, civil, aeronautical and electrical engineering. Comprehensive, it ranges from the static analysis of two- and three-dimensional structures to stress analysis of thick slabs on...
Horwood, 1998. — 480 p. This book is aimed at senior undergraduates, graduates and engineers. It fills the gap between the numerous textbooks on traditional Applied Mechanics and postgraduate books on Finite Element Methods. Key Features Fills the gap between the applied mechanics and finite element methods Discusses basic structural concepts and energy theorems, the discrete...
Springer, 1998. — 472 p. Providing an introduction to functional analysis, this text treats in detail its application to boundary-value problems and finite elements, and is distinguished by the fact that abstract concepts are motivated and illustrated wherever possible. It is intended for use by senior undergraduates and graduates in mathematics, the physical sciences and...
Springer, 1998. — 472 p. Providing an introduction to functional analysis, this text treats in detail its application to boundary-value problems and finite elements, and is distinguished by the fact that abstract concepts are motivated and illustrated wherever possible. It is intended for use by senior undergraduates and graduates in mathematics, the physical sciences and...
Springer, 1992. — 286 p. State-of-the-art nonlinear computational analysis of shells, nonlinearities due to large deformations and nonlinear material behavior, alternative shell element formulations, algorithms and implementational aspects, composite and sandwich shells, local and global instabilities, optimization of shell structures and concepts of shape finding methods of free...
Academic Press, 2015. — 501 p. Fundamental coverage, analytic mathematics, and up-to-date software applications are hard to find in a single text on the finite element method (FEM). Dimitrios Pavlou’s Essentials of the Finite Element Method: For Structural and Mechanical Engineers makes the search easier by providing a comprehensive but concise text for those new to FEM, or...
Springer, 2003. — 342 p. This book is an essential tool written to be used as the primary text for an undergraduate or early postgraduate course as well as a reference book for engineers and scientists who want to quickly develop finite-element programs. Regarding the formulation of the finite element method, the book emphasizes the essential unity of all processes of...
Prentice Hall, 1992. — 432 p. Providing a systematic approach and simple introduction ot the finite element method, this self-contained book will enable the reader to obtain a clear understanding of the concepts involved in this traditionally complicated methodology.