Москва: Машгиз, 1958.- 452 с. Настоящая книга является сборником оригинальных докладов, сделанных представителями различных стран на 23-м Международном конгрессе литейщиков, состоявшемся в 1956 г. в г. Дюссельдорфе (ФРГ). Ежегодно в одной из стран, входящих в Международное общество литейщиков, проводится конгресс, на котором освещаются вопросы состояния и перспектив в области...
Москва: Машгиз, 1960. - 480 с. Книга содержит доклады, сделанные представителями различных стран на 24-м Международном конгрессе литейщиков в 1957 г. в Стокгольме (Швеция). Ежегодно в одной из стран, входящих в Международное общество литейщиков, проводится конгресс, на котором освещаются вопросы состояния и перспектив литейного производства. На 24-м конгрессе было заслушано 28...
Москва: Машгиз, 1961. - 676 с. Книга содержит доклады, сделанные представителями различных стран на 26-м Международном конгрессе литейщиков в октябре 1959 г. в Мадриде. Доклады освещают вопросы, имеющие актуальное значение для литейного производства. На конгрессе присутствовали делегаты от 16 стран. Было заслушано 32 доклада. Кроме того, в книге помещены 19 докладов, сделанных...
Москва: Машгиз, 1961. - 424 с. Книга содержит доклады, сделанные представителями разных стран на 27-м Международном конгрессе литейщиков в Цюрихе в 1960 г. В докладах отражены научно-исследовательские и производственные работы, представляющие интерес для советских читателей, как показывающие развитие отдельных вопросов зарубежного литейного производства. Книга рассчитана на...
Москва: Машгиз, 1964. - 408 с. Книга содержит доклады, сделанные представителями различных стран на 28-м Международном конгрессе литейщиков в июне 1961 г. в Вене. Доклады освещают новейшие вопросы литейного производства в разных странах, имеющие актуальное значение для промышленности. На конгрессе присутствовало 1250 делегатов от 23 стран. Было заслушано 30 докладов. Книга...
Москва: Машиностроение, 1967. - 176 с. Книга содержит доклады, сделанные представителями различных стран на 29-м Международном конгрессе литейщиков в мае 1962 г. в Детройте. Доклады освещают новейшие вопросы литейного производства в разных странах, имеющие актуальное значение для промышленности. Было заслушано 23 доклада. Книга предназначена для научных и инженерно-технических...
Москва: Машиностроение, 1967. - 284 с. Книга содержит 27 докладов, сделанных представителями различных стран на 30-м Международном конгрессе литейщиков, состоявшемся в сентябре 1963 г. в Праге, и посвященных самым разнообразным вопросам литейного производства. Изложены основные проблемы металловедения и металлургии чугуна, главным образом чугуна с шаровидным графитом. Описана...
Москва: Машиностроение, 1967. - 224 с. Книга содержит подробные рефераты докладов, сделанных представителями различных стран на 31-м Международном конгрессе литейщиков в сентябре 1964 г. в Амстердаме. Доклады освещают состояние в разных странах вопросов литейного производства, имеющих актуальное промышленное и научно-техническое значение. Рефераты выполнены советскими...
Москва: Машиностроение, 1969. - 252 с. Книга содержит доклады, представляющие интерес для советских специалистов литейного производства. Доклады прочитаны крупными учеными на очередном 32-м Международном конгрессе литейщиков в Варшаве (Польше). В докладах отражены новейшие исследования в области литейного производства многих стран. Материалы докладов касаются практически всех...
Москва: Машиностроение, 1971. - 200 с. Книга содержит доклады (или их краткое изложение) крупных специалистов, работающих в области литейного производства в различных странах мира. Доклады сделаны на 34-м Международном конгрессе литейщиков в октябре 1967 г. в Париже. В докладах рассмотрен широкий круг вопросов, относящихся ко всем элементам литейного производства (формовочные...
Москва: Машиностроение, 1972. – 240 с.
Книга содержит доклады, прочитанные виднейшими учеными разных стран на очередном Международном конгрессе литейщиков в Киото (Япония).
В докладах отражены новейшие достижения и исследования в области литейного производства. Рассмотрены металлургические процессы плавки металлов, формовочные и огнеупорные материалы, свойства литейных...
Berlin, Heidelberg, New York: Springer, 2007. — 362 P. — ISBN: 978-3-540-69844-9. The 8th International Conference of the European Scientific Association for Material Forming ESAFORM took place in Cluj-Napoca (Romania) at the end of April 2005 (http://conference.utcluj.ro/esaform2005). The conference was organised by the Research Centre on Sheet Metal Forming Technology CERTETA...
Aqeel Ahmed, Wahab M. S., Raus A. A., Kamarudin K., Qadir Bakhsh, Danish Ali
Статья. International Journal of Engineering and Technology. — Dec 2016-Jan 2017. — Vol. 8. — № 6. — Р. 2552-2557.
Selective Laser Melting (SLM) is an advance Additive Manufacturing (AM) technique in which a component is manufacturing in a layer by layer manner by melting the top surface of a powder...
Статья. Solid Freeform Fabrication Proceedings, Austin: The University of Texas, 2006. — Р. 268-279.
This paper advances the findings of the selective laser melting (SLM) of tool steel and stainless steel powders. The distinguishing feature is the melting of single layers in deep powder beds by a continuous CO2 laser. First, effect of process parameters on the surface roughness...
Статья. 19th World Conference on Non-Destructive Testing (WCNDT 2016), 13-17 June 2016 in Munich. [Online]. Available: http://www.ndt.net/article/wcndt2016/papers/th1b1.pdf. — Р. 8 р.
Selective laser melting is a promising technology for additive manufacturing of complex shaped parts. The technique uses metallic powder as starting material and a laser for melting and...
Yu.P. Bobrov, A.E. Dmitrenko, D.V. Koblik, S.D. Lavrinenko, M. Laubenstein, S.S. Nagorny, M.M. Pylypenko, Yu.S. Stadnik, I.G. Tantsyura, V.D. Virich
Статья. Вопросы атомной науки и техники. — 2014. — №1(89). — С. 27-31.
In this paper we are reported about theoretical calculation and experimental investigation of Vanadium purification by electron-beam melting. This method has...
Статья. Rapid Prototyping Journal. — Vol. 21. — № 4.
Selective Laser Melting (SLM) of high temperature nickel-base superalloys has had limited success due to the susceptibly of the material to solidification and reheat cracking. The aim of this study is to optimise the SLM process parameters for CMSX486 in order to produce a ‘void-free’ (fully consolidated) material, whilst...
Статья. Proceedings of the XIth International Congress and Exposition June 2-5, 2008 Orlando, Florida USA, Orlando: Society for Experimental Mechanics, 2008.
Selective Laser Melting (SLM) is becoming very diffused in layer manufacturing processes because of the possibility to build complex 3D parts. The process is mainly suited for the production of tools and inserts with...
Choi Ki Yong, Yu. A. Lebedinsky, E. I. Marukovich, A. M. Branovitsky, V A. Dementev
Статья. Литье и металлургия. — 2015. — № 1 (78). — С. 5-11.
The present paper describes a developed analyzing system of roll surface during the process of continuous hot dip zinc coated steel sheet production line, in particular, adhering problem by transferred inclusions from roll to steel...
Rijeka: InTech, 2012. — 178 p. The use of copper and its alloys by humans goes back thousands of years. Probably copper is the most ancient metal extracted and processed by mankind. With good strength and ductility, ease of processing and good availability, copper has been for millennia an excellent material for creating objects, jewelry and tools of daily use or components...
Статья. International Journal of Simulation Modelling. — 2011. — №3. — P. 113-121. Selective Laser Melting (SLM) is actually the most attractive technique in an Additive Manufacturing (AM) technology because of the possibility to build layer by layer up nearly full density metallic components without needing for post-processing. One of the main problems in SLM processes is...
Статья. Proceedings of the 22h Solid Freeform Fabrication Symposium. — Austin: University of Texas, 2011. — Р. 212-226.
Selective Laser Melting (SLM) is an Additive Manufacturing technique which
allows producing three-dimensional metallic parts from powder material, using a layerby-layer fashion. Typical applications of this technology are parts with high geometrical...
Статья. Mechanics & Industry. — 2016. — Vol. 17. — №7. — 11 р.
The on-line optical diagnostics studies of selective laser melting are difficult to accomplish due to the need of closed chamber of inert gas protective atmosphere. In this term, this study was initiated to make evidence of oxygen influence on the signal from the melt pool. The results make clear the temperature...
Graf B., Schuch M., Kersting R., Gumenyuk A., Rethmeier M.
Статья. International Conference on Lasers in Manufacturing, LIM 2015. Munich.
Selective Laser Melting (SLM) and Laser Metal Deposition (LMD) are prominent methods in the field of additive manufacturing technology. While the powder-bed based SLM allows the manufacturing of complex structures, build rate and part...
Статья. Annual International Solid Freeform Fabrication Symposium, Zürich: ETH-Zürich, 2016. — P. 1428-1438.
The additive manufacturing of metal parts is of increasing importance for various industry sectors, but processes like selective laser melting are still lacking of robustness especially in the case of hard to process materials. The local adjustment of temperature fields...
Статья. Computational Mechanics. — July 2014. — Vol. 54. — Issue 1. — Р. 33–51.
Selective laser melting (SLM) is an additive manufacturing process in which multiple, successive layers of metal powders are heated via laser in order to build a part. Modeling of SLM requires consideration of both heat transfer and solid mechanics. The present work describes continuum modeling of...
Москва, Ленинград, Свердловск: ОНТИ, 1934. - 628 с.
Содержание
Паровые двигатели при прокатных станах.
Электрические двигатели при прокатных станах.
Конструкция прокатных станов и их оборудование.
Калибровка.
Прокатное производство.
Прокатка труб.
Отделка сортового и фасонного железа и железнодорожного материала.
Прокатка жести.
Волочение проволоки.
Ковка и...
Статья. IUTAM Symposium on Growing solids: Symposium Materials. — Moscow: A. Ishlinsky Institute for Problems in Mechanics of the Russian Academy of Science, 2015. — P. 48-51.
Selective laser melting (SLM) and Direct laser metal deposition (DLMD) are well known additive manufacturing processes to produce complex net-shaped and nearly net-shaped parts. Both methods provide...
Статья. Archives of Materials Science and Engineering. — 2013. — Vol. 60. — №2. — P. 87-92.
The main objective of this study was performed to determine the effect of selective laser sintering parameters such as power output, laser distance between the point’s sintered metal powder during additive manufacturing as well as the orientation of the model relative to the laser beam...
Статья. Solid Freeform Fabrication Proceedings. — Austin: The University of Texas , 2004. — Р. 44-59. Layer Manufacturing (LM) technologies like Selective Laser Sintering (SLS) were developed in the late 80’s as techniques for Rapid Prototyping (RP). Today, SLS - as well as its derived technology Selective Laser Melting (SLM) - is used as well for prototyping, tooling and...
Dissertation submitted for the degree of Doctor of Philosophy. — University of Manchester, 2014. — 224 p. Flow forming is a fairly new technique used for the production of dimensionally accurate near net shaped hollow components. The process has many advantages such as cost effectiveness and eliminating further operations like welding, machining, etc. This study focuses on the...
Статья. Materials. — 2016. — Vol. 9. — №6. — Р. 470.
Advanced manufacturing encompasses the wide range of processes that consist of “3D printing” of metallic materials. One such method is Electron Beam Melting (EBM), a modern build technology that offers significant potential for lean manufacture and a capability to produce fully dense near-net shaped components. However, the...
Megahed M., Mindt H.-W., N’Dri N., Duan H., Desmaison O.
Статья. Integrating Materials and Manufacturing Innovation. — 2016. — 5:4. — 33 Р.
Additive manufacturing (AM), widely known as 3D printing, is a direct digital manufacturing process, where a component can be produced layer by layer from 3D digital data with no or minimal use of machining, molding, or casting. AM has...
Статья. Materialwissenschaft und Werkstofftechnic. — 2008. — V. 39. — №. 8. — Р. 1-6.
Laser assisted generative production techniques like Selective Laser Melting (SLM) are novel but complex near net shape fabrication methods. The present paper describes properties of metallic specimens generated by SLM. Therefore various process parameters were observed to evaluate their...
Статья. Journal of Materials Processing Technology. — 2010. — Vol. 210 (2010). — P. 279–287.
Pulse shaping is a technique used to temporally distribute energy within a single laser pulse. This provides the user an added degree of control over the heat delivered to the laser material interaction zone. Pulses that induce a gradual heating or a prolonged cooling effect can be...
Prashanth K., Scudino S., Сhaubey A., Löber L., Wang P., Atar H., Schimansky F., Pyczak F., Eckert J.
Статья. Journal of materials research. — 31 (01). — Р. 55-65.
Al–12Si (80 vol%)–Ti52.4Al42.2Nb4.4Mo0.9B0.06 (at.%) (TNM) composites were successfully produced by the selective laser melting (SLM). Detailed structural and microstructural analysis shows the formation of the...
Статья. Proceedings of the 5th Manufacturing Engineering Society International Conference – Zaragoza – June 2013. — 8 р.
Selective Laser Melting has been one of the last generation technologies of additive manufacturing. So far, one of the major problems confronted by researchers and designers has been the standardization of the optimal parameters. The setting of the...
Статья. Опубликована в Wire Industry. — 1976. — July. — P. 565-567.
Continuity and better product quality have been the reasons for the development of processes for making copper wire. Most of the new methods are suitable for very high outputs only and cannot be installed by small producers. This article describes a process where oxygen-free copper wire rod is cast vertically...
Raus A.A., Wahab M.S., Shayfull Z., Kamarudin K., Ibrahim M.
Статья. MATEC Web Conf.. — 2016. — Vol. 78. — Article Number 01078. — 9 р.
Selective Laser Melting (SLM) is one of the most effective powder bed technique in the additive Manufacturing (AM) which able to fabricate functional metal parts directly from 3D Computer Aided Design (CAD) file data. In this paper, the...
Razin A., Ovchinnikov V., Akhmetshin R., Krinitcyn M., Fedorov V., Akhmetshina V. Статья. AIP Conf. Proc. — 2016. — Vol. 1783. — P. 020190-1–020190-4. This paper is dedicated to the study of selective laser melting process of metal powders. Experiments were performed in the Research Center Modern Manufacturing Technologies of TPU with the fine powders of titanium and niobium....
A dissertation submitted in partial satisfaction of the requirements for the degree of Doctor of Philosophy in Engineering - Mechanical Engineering and the Designated Emphasis in Energy Science and Technology in the Graduate Division of the University of California, Berkeley, 2015.
A significant percentage of total global employment is due to the manufacturing industry....
Sing S.L., Liu Z.H., Zhang D.Q., Yeong W.Y., Chua C.K.
Статья. Proceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014), Singapore: Research Publishing Services, 2014. — Р. 66-71.
Selective Laser Melting (SLM) was used to fabricate sample parts made of two metallic materials, 316L stainless steel and UNS C18400 copper alloy. The...
Статья. IOP Conf. Series: Materials Science and Engineering. — 2016. — Vol. 142. — 7 p.
In this article the results of experimental study of the structure and mechanical properties of materials obtained by selective laser melting (SLM), metal powder steel 316L was carried out. Before the process of cultivation of samples as the input control, the morphology of the surface of...
Информационный бюллетень SMS Group. Содержание: Corporate News Technology report SAF and electric smelting plants Steelworks CC technology Secondary metallurgy Concast: CC technology CSP news Hot rolling mills Hot strip Heavy plate Logistics systems Aluminum plants SMS Lubrication Cold rolling mills Strip processing lines Technical service SMS Elotherm Hertwich Engineering SMS...
Информационный бюллетень SMS Group. Содержание: Corporate news Enviromental technology SAF and electric smelting plants Steelworks Continuous casting technology Secondary metallurgy SMS Concast CSP news Hot rolling mills Hot strip Electrics and automation Logistics systems Morgoil bearings Aluminum plants Cold rolling mills Strip processing lines Technical service Hertwich...
Информационный бюллетень SMS Group. Содержание: PQF Tube Plants Research & Development SAF and Electric Smelting Plants Steelworks Continuous Casting Technology Secondary Metallurgy SMS Concast: Minimills and CSP Hot Rolling Mills Project Management Aluminum Mills Cold Rolling Mills Cold Rolling Mills/Strip Processing Lines Strip Processing Lines Technical Service SMS Elotherm...
Информационный бюллетень SMS Group.
Содержание:
Corporate News
Aluminum Plants
SAF and Electric Smelting Plants
Steelworks
CC Technology
Secondary Metallurgy
Steelworks for Long Products
SMS Concast: Steelworks for Long Products
SMS Concast: CC Technology for Long Products
CSP News
Hot Rolling Mills
Cold Rolling Mills
Strip Processing Lines
Electrics and...
Информационный бюллетень SMS Group. Содержание: Corporate News Samsung delegation at SMS Meer Research & Development Innovations by SMS Siemag SAF and Electric Smelting Plants Four calcium carbide furnaces for China Steelworks CC Technology for Flat Products Secondary Metallurgy Steelworks and CC Technology for Long Products CSP News Hot Rolling Mills Hot Rolling...