American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 2002. Last previous edition approved in 2004 as D 6779 - 04a. 14 p. This classification system covers polyamide materials suitable for molding and extrusion. Some of these compositions are also suitable for application from solution. This...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2005. Published June 2005. Originally approved in 2000. Last previous edition approved in 2000 as D 6585 - 00. 4 p. This specification covers unsintered extruded films or tapes manufactured from virgin, unpigmented polytetrafluoroethylene, in nominal thickness from 0.025 to 0.51 mm [0.001 to 0.020...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1999. Last previous edition approved in 1999 as D 6437 - 99. 3 p. This test method covers measuring alkalinity in lowalkalinity ( 0.002 meq/g basicity) polyols. This alkalinity is often expressed as CPR (controlled polymerization rate) of...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2005. Published June 2005. Originally approved in 1999. Last previous edition approved in 2003 as D 6394 - 03. 6 p. This specification covers the classification of sulfone plastics suitable for injection molding and extrusion. The properties included in this specification are those required to...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1998. Last previous edition approved in 2004 as D 6339 - 04. 6 p. This specification covers syndiotactic polystyrene materials including homopolymer, copolymers, blends, and impact modified, suitable for molding and extrusion. Recycled product...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2005. Published June 2005. Originally approved in 1998. Last previous edition approved in 1998 as D 6290 - 98. 5 p. This test method is intended primarily for the instrumental measurement of the degree of yellowness (or change of degree of yellowness) under daylight illumination of homogeneous,...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1998. Last previous edition approved in 1998 as D 6287 - 98. 3 p. This practice covers equipment and techniques for cutting film and sheeting specimens for testing.2 The specimens are nick-free, non stretched and can be rapidly prepared. The...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2005. Published June 2005. Originally approved in 1998. Last previous edition approved in 1998 as D 6226 - 98. 7 p. This test method covers cellular plastics, which are composed of membranes or walls of polymer separating small cavities or cells. These cells may be interconnecting (open cell),...
American Society for Testing and Materials (ASTM). Current edition approved February 1, 2005. Published February 2005. Originally approved in 1997. Last previous edition approved in 2003 as D 6109 - 03. 7 p. These test methods are suitable for determining the flexural properties for any solid or hollow manufactured plastic lumber product of square, rectangular, round, or other...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1996. Last previous edition approved in 2002 as D 5948 - 96(02). 18 p. This specification covers the basic properties of thermoset molding compounds and the test methods used to establish the properties.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1996. Last previous edition approved in 2004 as D 5857 - 04. 20 p. This specification covers polypropylene materials suitable for injection molding and extrusion. Polymers consist of polypropylene homopolymers, polypropylene copolymers, and...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1994. Last previous edition approved in 1999 as D 5629 - 99. 3 p. This test method measures the acidity, expressed as ppm of hydrochloric acid (HCl), in aromatic isocyanate or polyurethane prepolymer samples of below 100 ppm acidity. The test...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2008. Published April 2008. Originally approved in 1992. Last previous edition approved in 2001 as D5319 – 97(2001). 4 p. This specification covers the classification, materials of construction, workmanship, physical requirements, and methods of testing glass-fiber-reinforced polyester composite...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1992. Last previous edition approved in 1997 as D 5296 - 97. 13 p. This test method covers the determination of molecular weight (MW) averages and the distribution of molecular weights for linear, soluble polystyrene by liquid highperformance...
Американское общество по тестированию и материалам (ASTM). Перевод на русский язык. 9 стр. Этот метод испытаний охватывает определение плотности или относительной плотности сырой нефти, которая является жидкостью при температурах испытаний от 15 до 35 °С. Это приложение применимо для сырой нефти с высоким давлением насыщенных паров, с соблюдением соответствующих мер...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2011. Published August 2011. Originally approved in 1986. Last previous edition approved in 2005 as D4587 – 05. 6 p. This practice covers the selection of test conditions for accelerated exposure testing of coatings and related products in fluorescent UV and condensation devices conducted according...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2009. Published June 2009. Originally approved in 1974. Last previous edition approved in 2008 as D3359 – 08. 8 p. These test methods cover procedures for assessing the adhesion of coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film....
American Society for Testing and Materials (ASTM). Current edition approved Oct. 15, 2006. Published November 2006 Originally approved in 1971. Last previous edition approved in 2001 as D2992-01. 11 p. This practice establishes two procedures, Procedure A (cyclic) and Procedure B (static), for obtaining a hydrostatic design basis (HDB) or a pressure design basis (PDB) for...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2010. Published December 2010. Originally approved in 1969. Last previous edition approved in 2004 as D2794 – 93 (2004). 3 p. This test method covers a procedure for rapidly deforming by impact a coating film and its substrate and for evaluating the effect of such deformation. This test method...
American Society for Testing and Materials (ASTM). Current edition approved April l, 2008. Published May 2008. Originally approved in 1960. Last previous edition approved in 2002 as D l7l0 - 02. 5 p. This specification covers extruded polytetrafluoroethylene (PTFE) rod, heavy-walled tubing, and basic shapes manufactured from the PTFE resin of Specification D 4894 and reprocessed...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2013. Published July 2013. Originally approved in 1954. Last previous edition approved in 2007 as D1308 – 02 (2007). 2 p. This test method covers determination of the effect of household chemicals on clear and pigmented organic finishes, resulting in any objectionable alteration in the surface,...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2011. Published May 2011. Originally approved in 1947 (replacing former D615). Last previous edition approved in 2007 as D910–07a. 8 p. This specification covers formulating specifications for purchases of aviation gasoline under contract and is intended primarily for use by purchasing agencies....
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2011. Published July 2011. Originally approved in 1927, replacing D
47. Last previous edition approved in 2009 as D97–09. 5 p. This test method covers and is intended for use on any petroleum product.2 A procedure suitable for black specimens, cylinder stock, and nondistillate fuel oil is...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2009. Published January 2010. Originally approved in 2004. Last previous edition approved in 2004 as A1042/A1042M - 04. 8 p. This specification covers composite corrugated steel pipe, intended for uses such as storm water drainage, sanitary sewers, underdrains, construction of culverts, and similar...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2008. Published November 2008. Originally approved in 2001. Last previous edition approved in 2004 as A1016/A1016M - 04a. 11 p. This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2008. Published June 2008. Originally approved in 1998. Last previous edition approved in 1998 as A 998/A 998M - 98(2003). 19 p. This practice covers the structural design of reinforcement for fittings in factory-made, round corrugated steel pipe, conforming to Specifications A 760/A 760M or A 762/...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published May 2006. Originally approved in 1998. Last previous edition approved in 2006 as A 996/A 996M – 06. 5 p. This specification covers rail-steel and axle-steel bars for concrete reinforcement. Three types of product are included, designated with a rail symbol, and an R for bars made of...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2011. Published May 2011. Originally approved in 1996. Last previous edition approved in 2011 as A964/A964M - 03. 12 p. This specification covers material, geometric, and wall section properties of steel box culverts manufactured from corrugated plate or sheet, with or without attached stiffeners,...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2009. Published December 2009. Originally approved in 1994. Last previous edition approved in 2003 as A930 - 03. 5 p. This practice covers a procedure for using life-cycle cost (LCC) analysis techniques to evaluate alternative drainage system designs using corrugated metal pipe that satisfies the...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2007. Published July 2007. Originally approved in 1995. Last previous edition approved in 2001 as A 929/A 929M - 01. 4 p. This specification covers steel sheet used in the manufacture of corrugated steel pipe for storm sewers, culverts, drains, and similar uses. The sheet is metallic coated by the...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2008. Published July 2008. Originally approved in 1986. Last previous edition approved in 2003 as A 862/A 862M - 98(2003). 3 p. This practice covers the post coating of corrugated steel pipe and corrugated structural steel plate with asphalt materials. This practice is intended for shop-applied...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2010. Published January 2011. Originally approved in 1985. Last previous edition approved in 2005 as A849 - 00(2005). 8 p. This specification covers post-applied coatings, pavings, and linings for corrugated steel pipe and corrugated steel structural plate pipe, pipe-arches, and arches coated,...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2008. Published December 2008. Originally approved in 1982. Last previous edition approved in 2002 as A 807/A 807M - 02. 7 p. This practice covers procedures, soils, and soil placement for the proper installation of corrugated steel structural plate pipe, pipe-arches, arches, and underpasses...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 15, 2007. Published October 2007. Originally approved in 1982. Last previous edition approved in 2001 as A 798/A 798M - 01. 6 p. This practice covers procedures, soils, and soil placement for the proper installation of corrugated steel pipe and pipe-arches produced to Specification A 760/A 760M or A...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2010. Published January 2011. Originally approved in 1982. Last previous edition approved in 2006 as A796/A796M - 06. 22 p. This practice covers the structural design of corrugated steel pipe and pipe-arches, ribbed and composite ribbed steel pipe, ribbed pipe with metallic-coated inserts, closed...
American Society for Testing and Materials (ASTM). Current edition approved September 1, 2005. Published September 2005. Originally approved in 1981. Last previous edition approved in 2005 as A 789/A 789M–05a. 5 p. This specification covers grades of nominal wall thickness, stainless steel tubing for services requiring general corrosion resistance, with particular emphasis on...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2008. Published June 2008. Originally approved in 1979. Last previous edition approved in 2000 as A 762/A 762M – 00. 10 p. This specification covers polymer precoated corrugated steel pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2009. Published January 2010. Originally approved in 1979. Last previous edition approved in 2004 as A761 – 04. 8 p. This specification covers corrugated steel structural plate, zinc-coated, used in the construction of pipe, pipearches, arches, underpasses, and special shapes for field assembly....
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2010. Published October 2010. Originally approved in 1979. Last previous edition approved in 2009 as A760/A760M - 09. 15 p. This specification covers corrugated steel pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2008. Published December 2008. Originally approved in 1977. Last previous edition approved in 2003 as A 742/A 742M – 03. 4 p. This specification covers polymer precoated steel sheet for corrugated steel pipe (CSP) which is coated after metallic coating on continuous lines by coil coating (roller...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2008. Published October 2008. Originally approved in 1965. Last previous edition approved in 2008 as A 554 – 08. 6 p. This specification covers welded stainless steel tubing for mechanical applications where appearance, mechanical properties, or corrosion resistance is needed. The grades covered...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published April 2006. Originally approved in 1954. Last previous edition approved in 2004 as A376/A376M – 04. 7 p. This specification covers seamless austenitic steel pipe intended for high-temperature central-station service. Among the grades covered are five H grades and two nitrogen...
American Society for Testing and Materials (ASTM). Current edition approved July 1, 2005. Published August 2005. Originally approved in 1996. Last previous edition approved in 1996 as D 6038 – 96. 5 p. These test methods cover the manual and automatic procedures for testing the compatibility of lithographic ink resins in high boiling ink solvents by precipitation temperature...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2005. Published February 2006. Originally approved in 1996. Last previous edition approved in 2000 as D 5974 – 00. 6 p. These test methods cover the determination of the amounts of the individual fatty acids and rosin acids in fractionated tall oil products, using capillary gas chromatographic...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2005. Published September 2005. Originally approved in 1996. Last previous edition approved in 1999 as D 5958 - 99. 6 p. These practices describe laboratory procedures for preparing an oil-based ink resin solution in a high-boiling solvent using four pieces of lab equipment; (1) a hot oil...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published January 2006. Originally approved in 1996. Last previous edition approved in 1996 as D 5910 – 96 which was withdrawn December 2004 and reinstated in October 2005. 6 p. This test method is used for the determination of free formaldehyde (HCHO) in emulsion polymers without upsetting...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2005. Published September 2005. Originally approved in 1984. Last previous edition approved in 1996 as D 4301 – 84 (1996), which was withdrawn June 2005 and reinstated in September 2005. 3 p. This test method describes a procedure for the determination of total chlorine in epoxy resins and...
American Society for Testing and Materials (ASTM). Current edition approved July 1, 2005. Published July 2005. Originally approved in 1980. last previous edition approved in 1999 as D 3926 – 80 (1999). 3 p. These test methods cover the determination of the weight percent of solids in aqueous slurries of titanium dioxide pigments by either the use of a gravity-convection oven...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2005. Published September 2005. Originally approved in 1979. Last previous edition approved in 1999 as D 3872 – 86 (1999). 3 p. This test method covers the quantitative determination of ferrous oxide (FeO) by oxidation of ferrous iron (Fe++) in an acid solution to the ferric state (Fe+++) and...
American Society for Testing and Materials (ASTM). Current edition approved July 1, 2005. Published August 2005. Originally approved in 1978. Last previous edition approved in 1999 as D 3720 - 90 (1999). 3 p. This test method covers the determination of the ratio of anatase to rutile in titanium dioxide pigments. The method is also applicable to pigment mixtures and pigmented...