American Society for Testing and Materials (ASTM). Current edition approved Oct. 15, 2006. Published October 2006. Originally approved 1965. Last previous edition approved in 2005 as B 422 – 05. 5 p. This specification establishes the requirements for Copper Alloy UNS Nos. C19010, C19020, C19025, C63800, C64725, C70250, C70260, and C70265 sheet and strip.
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1964. Last previous edition approved in 2001 as B 418 – 01. 3 p. This specification covers cast and wrought galvanic zinc anodes used for the cathodic protection of more noble metals and alloys in sea water, brackish water, other saline...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1965. Last previous edition approved in 2001 as B 411/ 411M – 01. 3 p. This specification establishes the requirements for copper-nickel-silicon alloy rod and bar produced from Copper Alloy UNS No. C64700 in straight lengths
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1957. Last previous edition approved in 2001 as B 409 – 01. 5 p. This specification covers UNS N08120, UNS N08890, UNS N08800, UNS N08810, and UNS N08811* in the form of rolled plate, sheet, and strip. Alloy UNS N08800 is normally employed in...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1957. Last previous edition approved in 2001 as B 408 – 01. 5 p. This specification covers UNS N08120, UNS N08800, UNS N08810, UNS N08811*, and UNS N08890 in the form of hot-worked and cold-worked rod and bar. Alloy UNS N08800 is normally...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1999. Last previous edition approved in 2003 as B 393 - 03. 5 p. This specification covers five grades of wrought niobium and niobium alloy strip, sheet, and plate. Except for dimensional tolerances in Table 1, the values stated in inch-pound...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published July 2006. Originally approved in 1962. Last previous edition approved in 2000 as B 388 – 00. 7 p. This specification covers thermostat metals in the form of sheet or strip that are used for the temperature-sensitive elements of devices for controlling, compensating, or indicating...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1961. Last previous edition approved in 2005 as B 371/B 371M – 05. 3 p. This specification establishes the requirements for copper-zinc-silicon alloy rod produced in Copper Alloy UNS Nos. C69300, C69400, C69430, C69700, and C69710.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1961. Last previous edition approved in 2003 as B 369 – 96 (2003). 5 p. This specification establishes the requirements for copper-nickel alloy castings with nominal compositions shown in Table 1.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1961. Last previous edition approved in 2005 as B 367 – 05. 5 p. This specification covers titanium and titanium alloy castings intended for general corrosion resistant and industrial applications.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1960. Last previous edition approved in 2002 as B 359/B 359M – 02. 11 p. This specification2 establishes the requirements for seamless copper and copper alloy tubing on which the external or internal surface, or both, has been modified by a...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 15, 2006. Published October 2006. Originally approved in 1960. Last previous edition approved in 2002 as B 352/B 352M – 02. 6 p. This specification covers hot- and cold-rolled zirconium and zirconium alloy sheet, strip, and plate. One unalloyed and three alloys for use in nuclear applications are...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1960. Last previous edition approved in 2002 as B 350/B 350M – 02. 4 p. This specification covers vacuum-melted zirconium and zirconium alloy ingots for nuclear application.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1959. Last previous edition approved in 2006 as B 348 – 06. 8 p. This specification covers annealed titanium and titanium alloy bars and billets.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1967. Last previous edition approved in 2000 as B 339 - 00. 4 p. This specification covers refined tin in pig form recovered and cast from primary and secondary tin-bearing materials. One grade of tin metal is specified and is designated by the...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1958. Last previous edition approved in 2006 as B 338 – 06. 8 p. This specification covers the requirements for 28 grades of titanium and titanium alloy tubing intended for surface condensers, evaporators, and heat exchangers.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1958. Last previous edition approved in 2001 as B 327 – 01. 4 p. This specification covers aluminum–base and zinc–base master alloys used to make zinc die-casting alloys. Alloy compositions specified for aluminum–base master alloys (hardeners)...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1957. Last previous edition approved in 1999 as B 315 – 99. 10 p. This specification establishes the requirements for seamless, copper alloy pipe and tube in nominal pipe sizes, both regular and extra strong, and seamless tube in straight...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1953. Last previous edition approved in 2004 as B 283 – 04. 8 p. This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing method.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1952. Last previous edition approved in 2001 as B 277 – 95 (2001). 2 p. This test method covers the determination of the hardness of metallic materials used for electrical contacts. Rockwell, Rockwell superficial, Brinell, and microhardness tests...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1954. Last previous edition approved in 2003 as B 271 – 96 (2003). 6 p. This specification establishes requirements for centrifugal castings of copper-base alloys having the nominal compositions shown in Table 1
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 1952. Last previous edition approved in 2006 as B 265 – 06a. 10 p. This specification covers annealed titanium and titanium alloy strip, sheet, and plate.
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1951. Last previous edition approved in 2004 as B 249/B 249M – 04. 13 p. This specification establishes the general requirements common to wrought copper and copper alloy rod, bar, shapes, and forgings which shall apply to Specifications B 16/B...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1980. Last previous edition approved in 2001 as B 248M – 01. 12 p. This specification establishes the general requirements common to several wrought product specifications. Unless otherwise specified in the purchase order or in an individual...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1951. Last previous edition approved in 2001 as B 248 – 01. 12 p. This specification establishes the general requirements common to several wrought product specifications. Unless otherwise specified in the purchase order or in an individual...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 1995. Last previous edition approved in 2001 as B 237 – 01. 2 p. This specification covers refined antimony in ingot, pig, or cake form. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1946. Last previous edition approved in 2004 as B 208 – 04. 11 p. This practice establishes procedures for preparing test coupons and specimens (machined and unmachined) for tension tests of copper alloys for sand, permanent mold, centrifugal...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1944. Last previous edition approved in 2003 as B 187 – 03. 9 p. This specification establishes the requirements for copper conductor bar, rod, and shapes for electrical (bus) applications and rod, bar, and shapes for general applications.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1941. Last previous edition approved in 2001 as B 169/B 169M – 01. 4 p. This specification establishes the requirements for Copper Alloy UNS Nos. C61300 and C61400 aluminum bronze sheet, strip, and rolled bar.
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1941. Last previous edition approved in 2005 as B 168 – 01 (2005). 11 p. This specification covers rolled nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and nickel-chromium-cobalt-molybdenum alloy...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1941. Last previous edition approved in 2005 as B 167 – 05a. 8 p. This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and nickel-chromium-cobalt-molybdenum alloy (UNS N06617) in...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1941. Last previous edition approved in 2004 as B 166 – 04. 8 p. This specification2 covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and nickel-chromium-cobalt-molybdenum alloy (UNS N06617) in...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published December 2005. Originally approved in 1941. Last previous edition approved in 2003 as B 165 – 93 (2003). 6 p. This specification covers nickel-copper alloy UNS N04400* in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1941. Last previous edition approved in 1999 as B 162 – 99. 9 p. This specification covers rolled nickel (UNS N02200) and low-carbon nickel (UNS N02201) plate, sheet, and strip.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published December 2005. Originally approved in 1941. Last previous edition approved in 2003 as B 161 - 03. 4 p. This specification covers nickel (UNS N02200)* and low-carbon nickel (UNS N02201)* in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1941. Last previous edition approved in 1999 as B 160 – 99. 6 p. This specification covers nickel (UNS N02200)*, low carbon nickel (UNS N02201)*, and solution strengthened nickel (UNS N02211) in the form of hot-worked and cold-worked rod and bar in...
American Society for Testing and Materials (ASTM). Current edition approved Mar. 1, 2005. Published March 2005. Originally approved in 1941. Last previous edition approved in 2001 as B 159 – 01. 3 p. This specification establishes the requirements for round, square and flat phosphor bronze wire of UNS Alloy Nos. C51000, C52100, and C52400 for general and spring applications.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1941. Last previous edition approved in 2001 as B 154 – 01. 3 p. This test method describes the technique for conducting the mercurous nitrate test for residual stresses in wrought copper alloy mill products.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1941. Last previous edition approved in 2003 as B 153 – 91 (2003). 2 p. This test method establishes the requirements for the expansion pin test for copper and copper-alloy pipe and tubing with an inside diameter of 0.125 in. (3.2 mm) and greater...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1941. Last previous edition approved in 2000 as B 151 – 00. 5 p. This specification establishes the requirements for copper-nickel-zinc and copper-nickel rod and bar for general application produced from Copper Alloy UNS Nos. C70600, C70620,...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1941. Last previous edition approved in 2001 as B 139/B 139M – 01. 5 p. This specification establishes the requirements for phosphor bronze rod, bar, and shapes.
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1941. Last previous edition approved in 2001 as B 138/B 138M – 01. 4 p. This specification establishes the requirements for manganese bronze rod, bar and shapes produced in Copper Alloy UNS Nos. C67000, C67500, or C67600.
American Society for Testing and Materials (ASTM). Current edition approved March 15, 2006. Published April 2006. Originally approved in 1984. Last previous edition approved in 2000 as B 135M – 00. 6 p. This specification covers seamless round and rectangular including square copper alloy tube in straight lengths of UNS Alloy Nos. C22000, C23000, C26000, C27000, C27200, C27400,...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1940. Last previous edition approved in 2001 as B 134/B 134M – 01. 7 p. This specification establishes requirements for round, hexagonal, octagonal, rectangular and square brass wire of UNS Alloy Nos. C21000, C22000, C22600, C23000, C23400,...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1939. Last previous edition approved in 1998 as B 127 - 98. 6 p. This specification covers rolled nickel-copper alloy (UNS N04400) plate, sheet, and strip. The values stated in inch-pound units are to be regarded as the standard. The other values...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1939. Last previous edition approved in 2004 as B 124/B 124M – 04. 5 p. This specification establishes the requirements for copper and copper alloy rod, bar, and shapes intended for hot forging
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1939. Last previous edition approved in 2001 as B 122/B 122M – 01. 7 p. This specification establishes the requirements for copper-nickel-tin alloy, copper-nickel-zinc alloy (nickel silver), and copper-nickel alloy plate, sheet, strip, and...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1939. Last previous edition approved in 2001 as B 121/B 121M – 01. 4 p. This specification establishes the requirements for copper-zinc-lead alloys (leaded brass) plate, sheet, strip, and rolled bar. The following alloys are covered Copper Alloy...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1935. Last previous edition approved in 2001 as B 99/B 99M – 01. 3 p. This specification establishes the requirements for round, rectangular, and square wire for general applications other than for electrical transmission cable. The alloys...
American Society for Testing and Materials (ASTM). Current edition approved March 15, 2006. Published March 2006. Originally approved in 1934. Last previous edition approved in 2001 as B 96/B 96M – 01. 4 p. This specification establishes the requirements for copper-silicon alloy plate, sheet, strip, and rolled bar for drawing, forming, stamping, bending, and general engineering...