American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published May 2006. Originally approved in 1959. Last previous edition approved in 2004 as A 434 – 04. 3 p. This specification covers hot-wrought and cold-finished quenched and tempered alloy steel bars. Hot-wrought bars are available in three strength level classes designated BB, BC, and...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2007. Published May 2007. Originally approved in 1958. Last previous edition approved in 2005 as A 426/A 426M - 05. 5 p. This specification covers centrifugally cast alloy steel pipe intended for use in high-temperature, high-pressure service. Several grades of ferritic stee are covered. Their...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2007. Published April 2007. Originally approved in 1958. Last previous edition approved in 2006 as A 420/A 420M – 06. 6 p. This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction, covered by the latest revision of ASME B 16.9, ASME B 16.11,...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2005. Published October 2005. Originally approved in 1957 . Last previous edition approved in 2001 as A 409/A 409M – 01. 6 p. This specification covers straight seam or spiral seam electric-fusion-welded, light-wall, austenitic chromium-nickel alloy steel pipe for corrosive or high-temperature...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2007. Published June 2007. Originally approved in 1957. Last previous edition approved in 2004 as A 407 – 93 (2004). 3 p. This specification covers round, cold-drawn, steel spring wire having properties and quality intended for the manufacture of upholstery springs.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published April 2006. Originally approved in 1956. Last previous edition approved in 2000 as A 400 – 69 (2000). 9 p. This practice covers the selection of steel bars according to section and to the mechanical properties desired in the part to be produced. This is not a specification for the...
American Society for Testing and Materials (ASTM). Current edition approved Aug. 1, 2007. Published August 2007. Originally approved in 1955. Last previous edition approved in 2005 as A 394 – 05. 6 p. This specification covers the chemical and mechanical requirements of hexagon and square-head zinc-coated steel bolts and atmospheric corrosion-resistant bolts, in nominal thread...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1954. Last previous edition approved in 2001 as A 381 – 96 (2001). 5 p. This specification covers straight seam, double submerged-are-welded steel pipe suitable for high pressure service, 16 in. (406 mm) and larger in outside diameter, with wall...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published May 2006. Originally approved in 1954. Last previous edition approved in 2005 as A 380 – 99 (2005). 13 p. This practice covers recommendations and precautions for cleaning, descaling, and passivating of new stainless stee parts, assemblies, equipment, and installed systems. These...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1947. Last previous edition approved in 2004 as A 304 – 04. 50 p. This specification covers hot-worked alloy, carbon, and carbon-boron steels in a variety of compositions and sizes, which may attain specified depth of hardening in the end quench...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published October 2007. Originally approved in 1942. Last previous edition approved in 2002 as A 255 – 02. 26 p. These test methods cover the identification and description of test methods for determining the hardenability of steels. The two test methods include the quantitative end-quench...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published September 2007. Originally approved in 1944. Last previous edition approved in 2006 as A 275/A 275M – 06. 7 p. This practice covers a procedure for magnetic particle examination of steel forgings. The procedure will produce consistent results upon which acceptance standards can be...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1941. Last previous edition approved in 2004 as A 250/A 250M – 04. 4 p. This specification covers several grades, designated T1, T1a, T1b, T2, T11, T12 and T22, of minimum-wall-thickness, electric-resistance-welded, carbon-molybdenum and...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2004. Published September 2004. Originally approved in 1939. Last previous edition approved in 2002 as A 231/A 231M – 96 (2002). 4 p. This specification covers round chromium-vanadium alloy steel spring wire having properties and quality intended for the manufacture of springs used at moderately...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1939. Last previous edition approved in 1999 as A 230/A 230M – 99. 4 p. This specification covers the highest quality of round carbon steel spring wire, uniform in quality and temper, intended especially for the manufacture of valve springs and...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1939. Last previous edition approved in 2005 as A 227/A 227M – 99 (2005). 4 p. This specification covers two classes of round colddrawn steel spring wire having properties and quality for the manufacture of mechanical springs that are not subject...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published October 2007. Originally approved in 1938. Last previous edition approved in 2003 as A 209/A 209M – 03. 3 p. This specification covers several grades of minimum-wall-thickness, seamless, carbon-molybdenum alloy-steel, boiler and superheater tubes. This specification covers tubes...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1935. Last previous edition approved in 2001 as A 181/A 181M – 01. 3 p. This specification covers nonstandard as-forged fittings, valve components, and parts for general service. Forgings made to this specification are limited to a maximum...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1931. Last previous edition approved in 2001 as A 134 – 96 (2001). 4 p. This specification covers electric-fusion (arc)-welded straight seam or spiral seam steel pipe NPS 16 and over in diameter (inside or outside as specified by purchaser), with...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2005. Published September 2005. Originally approved in 1996. Last previous edition approved in 2001 as A 967 – 01. 7 p. This specification covers several different types of chemical passivation treatments for stainless steel parts. It includes recommendations and precautions for descaling,...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2007. Published June 2007. Originally approved in 1977. Last previous edition approved in 2007 as A 751 – 07. 6 p. These test methods, practices, and terminology cover definitions, reference methods, practices, and guides relating to the chemical analysis of steel, stainless steel, and related...
American Society for Testing and Materials (ASTM). Current edition approved Jan. 1, 2005. Published February 2005. 6 p. This practice covers the determination of comparative hardness values by applying the Ultrasonic Contact Impedance Method (UCI Method).
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published September 2007. Originally approved in 2000. Last previous edition approved in 2007 asA 1008/A 1008M – 07. 9 p. This specification covers cold-rolled, carbon, structural, high-strength low-alloy, high-strength low-alloy with improved formability, solution hardened, and bake...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1953. Last previous edition approved in 2002 as A 369/A 369M – 02. 4 p. This specification covers heavy-wall carbon and alloy steel pipe made from turned and bored forgings and is intended for high-temperature service. Pipe ordered under this...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1952. Last previous edition approved in 2000 as A 355 – 89 (2000). 3 p. This specification covers alloy steel bars, suitable for surface hardening by nitriding, designated as Classes A, B, C, and D. Class A and Class D bars are general-purpose...
American Society for Testing and Materials (ASTM). Current edition approved Aug. 1, 2007. Published August 2007. Originally approved in 1952. Last previous edition approved in 2004 as A 354 – 04. 6 p. This specification covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners 4 in. and under in...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2007. Published May 2007. Originally approved in 1955. Last previous edition approved in 2006 as A 336/A 336M – 06a. 8 p. This specification covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associated equipment. Forgings made of steel grades listed in...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 15, 2007. Published September 2007. Originally approved in 1964. Last previous edition approved in 2006 as A 325 – 06. 8 p. This specification covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less and 105 ksi...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2007. Published May 2007. Originally approved in 1947. Last previous edition approved in 2006 as A 322 – 06. 4 p. This specification covers hot-wrought alloy steel bars. Bar applications include forging, heat treating, cold drawing, machining and many structural components. The bars shall be...
American Society for Testing and Materials (ASTM). Current edition approved Aug. 1, 2007. Published August 2007. Originally approved in 1947. Last previous edition approved in 2007 as A 307 – 07. 5 p. This specification2 covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs in sizes 1⁄4 in. through 4 in.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1939. Last previous edition approved in 1999 as A 232/A 232M – 99. 4 p. This specification covers the highest quality of round chromium-vanadium alloy steel valve spring wire, uniform in quality and temper, intended for the manufacture of valve...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published May 2005. Originally approved in 1939. Last previous edition approved in 1999 A 229/A 229M – 99. 4 p. This specification covers two classes of oil-tempered steel spring wire intended especially for the manufacture of mechanical springs and wire forms.
American Society for Testing and Materials (ASTM). Current edition approved March 15, 2006. Published April 2006. Originally approved in 1992. Last previous edition approved in 2000 as B 819 – 00. 7 p. This specification establishes the requirements for two wall thickness schedules of specially cleaned, straight lengths of seamless copper tube, identified as Types K and L,...
American Society for Testing and Materials (ASTM). Current edition approved Mar. 1, 2005. Published March 2005. Originally appproved in 1986. Last previous edition approved 1999 as B 754 – 89 (1999). 5 p. This test method describes a procedure for the measurement of distortions in thin metal strip and the application of these measurements to an equation that will indicate the...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1970. Last previous edition addition approved in 2003 as B 637 – 03. 6 p. This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service (Table 1).
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1972. Last previous edition approved in 2004 as B 575 - 04. 4 p. This specification2 covers plate, sheet, and strip of low-carbon nickel-chromium-molybdenum alloys (UNS N10276, N06022, N06455, N06035, UNS N06058, UNS N06059)*, low-carbon...
American Society for Testing and Materials (ASTM). Current edition approved Mar. 1, 2005. Published March 2005. Originally approved in 1967. Last previous edition approved in 2001 as B 455 – 01. 3 p. This specification establishes the requirements for extruded leaded-brass angles, channels, and other architectural shapes of solid cross section produced in Copper Alloy UNS Nos....
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published December 2005. Originally approved in 1964. Last previous edition approved in 2003 as B 423 - 03. 4 p. This specification covers nickel-iron-chromium-molybdenum-copper alloys (UNS N08825 and N08221) in the form of cold-worked and hot-finished seamless pipe and tube intended for...
American Society for Testing and Materials (ASTM). Current edition approved March 15, 2008. Published March 2008. Originally approved in 1941. Last previous edition approved in 2004 as B 163 – 04. 12 p. This specification covers seamless tubes of nickel and nickel alloys, as shown in Table 1, for use in condenser and heat-exchanger service. This specification covers outside...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1942. Last previous edition approved in 2006 as B 152/B 152M – 06. 7 p. This specification2 establishes the requirements for copper sheet, strip, plate, and rolled bar produced from the following coppers.
American Society for Testing and Materials (ASTM). Current edition approved Mar. 1, 2005. Published March 2005. Originally approved in 1984. Last previous edition approved in 1999 as B 75M – 99. 7 p. This specification establishes the requirements for seamless round, rectangular, and square copper tube suitable for general engineering applications.
American Society for Testing and Materials (ASTM). Current edition approved Mar. 1, 2005. Published March 2005. Originally approved in 1919. Last previous edition approved in 2001 as B 19 – 01. 6 p. This specification establishes the requirements for sheet, strip, plate, bar, and disks for the manufacture of ammunition of component parts thereof from alloy UNS C26000.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2008. Published June 2008. Originally approved in 1981. Last previous edition approved in 2002 as B 684 – 97 (2002). 3 p. This specification covers an 85 % platinum—15 % iridium alloy, and a 90 % platinum—10 % iridium alloy, in the form of rod, wire, strip, and sheet material for electrical contacts.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 15, 2009. Published December 2009. Originally approved in 1973. Last previous edition approved in 2009 as B584 – 09. 7 p. This specification covers requirements for copper alloy sand castings for general applications. Nominal compositions of the alloys defined by this specification are shown in Table...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1977. Last previous edition approved in 2003 as A743/A743M – 03. 7 p. This specification covers iron-chromium and ironchromium-nickel alloy castings for general corrosion-resistant application. The grades covered by this specification represent...
American Society for Testing and Materials (ASTM). Current edition approved March 15, 2006. Published March 2006. Originally approved in 1974. Last previous edition approved in 2005 as A 709/A 709M– 05. 8 p. This specification covers carbon and high-strength lowalloy steel structural shapes, plates, and bars and quenched and tempered alloy steel for structural plates intended for...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2005. Published April 2005. Originally approved in 1968. Last previous edition approved in 2004 as A 588/A 588M – 04. 3 p. This specification covers high-strength low-alloy structural steel shapes, plates, and bars for welded, riveted, or bolted construction but intended primarily for use in...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2007. Published March 2007. Originally approved in 1966. Last previous edition approved in 2006 as A 572/A 572M – 06. 4 p. This specification covers five grades of high-strength low-alloy structural steel shapes, plates, sheet piling, and bars. Grades 42 [290], 50 [345], and 55 [380] are intended...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1964. Last previous edition approved in 2005 as A 516/A 516M – 05. 4 p. This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1955. Last previous edition approved in 2005 as A 387/A 387M – 05a. 6 p. This specification covers chromium-molybdenum alloy steel plates intended primarily for welded boilers and pressure vessels designed for elevated temperature service.