American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published October 2007. Originally approved in 1983. Last previous edition approved in 2007 as A 815/A 815M – 07. 7 p. This specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published October 2007. Originally approved in 1983. Last previous edition approved in 2005 as A 814/A 814M – 05. 6 p. This specification covers two classes of flanged and cold-bending quality cold-worked straight-seam single or double welded austenitic steel pipe intended for...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published October 2007. Originally approved in 1983. Last previous edition approved in 2005 as A 813/A 813M – 01(2005). 8 p. This specification covers two classes of fit-up and alignment quality straight-seam single- or double-welded austenitic steel pipe intended for high-temperature and...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1982. Last previous edition approved in 2002 as A 794 – 97 (2002). 3 p. This specification covers cold-rolled commercial steel (CS) sheet in coils and cut lengths, in which the maximum of the specified carbon range is over 0.15 and not over 0.25...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published October 2007. Originally approved in 1981. Last previous edition approved in 2005 as A 790/A 790M – 05b. 8 p. This specification2 covers seamless and straight-seam welded ferritic/austenitic steel pipe intended for general corrosive service, with particular emphasis on resistance...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1981. Last previous edition approved in 2001 as A 787 – 01. 7 p. This specification covers round, square, rectangular, and special shape, electric-resistance-welded mechanical tubing, either zinc-coated (galvanized) after welding or produced from...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1980. Last previous edition approved in 2002 as A 774/A 774M – 02. 4 p. This specification covers five grades of as-welded, wrought austenitic stainless steel fittings for low-pressure piping and intended for low and moderate temperatures and...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published October 2007. Originally approved in 1979. Last previous edition approved in 2004 as A 765/A 765M – 04. 5 p. This specification covers heat-treated carbon steel and alloy steel forgings with mandatory toughness requirements. These forgings are intended for pressure vessels,...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2007. Published March 2007. Originally approved in 1979. Last previous edition approved in 2001 as A 764 – 95 (2001). 5 p. This specification covers two finishes of round, metallic coated, hard-drawn, carbon steel spring wire having properties and quality for the manufacture of mechanical springs...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 10, 2000. Published December 2000. Originally approved in 1978. Last previous edition approved in 1998 as A 758/A 758M – 98. 5 p. This specification covers wrought-carbon steel buttwelding seamless or welded fittings specially processed to ensure better notch toughness than that to be expected in...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1976. Last previous edition approved in 2000 as A 739 – 90a (2000). 2 p. This specification covers hot-wrought, ferritic alloy steel bars for elevated temperature or pressure-containing parts suitable for fusion welding or both.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1974. Last previous edition approved in 2000 as A 702 – 89 (2000). 4 p. This specification covers steel fence posts and assemblies manufactured from hot-wrought sections and intended for use in field and line fencing. The posts are available in...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1974. Last previous edition approved in 2000 as A 696 – 90a (2000). 3 p. This specification covers hot-wrought and cold-finished special quality carbon steel bars, in straight lengths only, subject to mechanical property requirements and intended...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1974. Last previous edition approved in 2003 as A 693 – 03. 9 p. This specification covers precipitation-hardening stainless steel plate, sheet, and strip. The mechanical properties of these steels are developed by suitable low-temperature heat...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1973. Last previous edition approved in 2002 as A 684/A 684M – 86 (2002). 4 p. This specification covers cold-rolled, high-carbon strip. It is furnished in the following types as specified. Soft spheroidized annealed high-carbon steel is...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2005. Published December 2005. Originally approved in 1973. Last previous edition approved in 2002 as A 682/A 682M – 02. 8 p. This specification covers the general requirements for cold-rolled carbon spring steel strip in coils or cut lengths. Strip is classified as product that is 0.3000 in. (7.6...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published May 2006. Originally approved in 1973. Last previous edition approved in 2000 as A 679/A 679M – 00. 4 p. This specification covers round, uncoated, high tensile strength, cold-drawn steel spring wire, having properties and quality suitable for the manufacture of mechanical springs...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1972. Last previous edition approved in 2001 as A 659/A 659M – 97 (2001). 3 p. This specification covers hot-rolled carbon steel (CS) sheet and strip, in coils and cut lengths, in which the maximum of the specified carbon range is over 0.15 and...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published September 2007. Originally approved in 1970. Last previous edition approved in 2006 as A 635/A 635M – 06a. 11 p. This specification covers the general requirements for hot-rolled, heavy-thickness sheet and strip in coils. It applies to Specification A 1018/A 1018M.
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1970. Last previous edition approved in 2002 as A 608/A 608M – 02. 6 p. This specification covers iron-chromium-nickel, high-alloy tubes made by the centrifugal casting process intended for use under pressure at high temperatures.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2007. Published June 2007. Originally approved in 1970. Last previous edition approved in 2003 as A 604 – 93 (2003). 15 p. This practice covers testing and inspection and is applicable to bars, billets, and blooms of carbon, alloy, and stainless steel which have been consumable electrode remelted.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1969. Last previous edition approved in 2004 as A 595 – 04a. 5 p. This specification covers three grades of seam-welded, round, tapered steel tubes for structural use. GradesAand B are of low-carbon steel or high-strength low-alloy steel...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published April 2006. Originally approved in 1968. Last previous edition approved in 2001 as A 589 – 96(2001). 12 p. This specification covers four specific types of plain end or threaded and coupled carbon steel pipe for use in water wells.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1968. Last previous edition approved in 2001 as A 587 – 96 (2001). 6 p. This specification covers electric-resistance-welded low-carbon steel pipe intended for use as process lines. Pipe ordered under this specification shall be suitable for...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1967. Last previous edition approved in 2000 as A 576 – 90b (2000). 5 p. This specification covers hot-wrought special quality carbon steel bars. Special quality bar applications include forging, heat treating, cold drawing, machining, and many...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published September 2007. Originally approved in 1966. Last previous edition approved in 2006 as A 568/A 568M – 06a. 29 p. This specification covers the general requirements for steel sheet in coils and cut lengths. It applies to the following specifications that describe carbon steel,...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2005. Published September 2005. Originally approved in 1966. Last previous edition approved in 2005 as A 565 – 05. 4 p. This specification covers hot-finished and cold-finished martensitic chromium steel bars for high-temperature service. The mechanical properties are developed by suitable heat...
American Society for Testing and Materials (ASTM). Current edition approved October 1, 2005. Published November 2005. Originally approved in 1965. Last previous edition approved in 2001 as A 556/A 556M – 96 (2001). 5 p. This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes, if specified, for use in...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1965. Last previous edition approved in 2004 as A 541/A 541M – 04. 6 p. This specification covers requirements for quenched and tempered carbon and alloy steel forgings for pressure vessel components. All grades are considered weldable under...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1965. Last previous edition approved in 2005 as A 540/A 540M – 05. 8 p. This specification covers regular and special-quality alloy steel bolting materials which may be used for nuclear and other special applications. Bolting materials as used in...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published April 2006. Originally approved in 1965. Last previous edition approved in 2001 as A 531/A 531M – 91 (2001).5 p. This practice covers the procedures to be followed when performing ultrasonic shear and longitudinal wave tests on -generator retaining rings with an inside diameter...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2005. Published December 2005. Originally approved in 1964. Last previous edition approved in 2004 as A 506 – 04. 4 p. This specification covers hot-rolled and cold-rolled
alloy and structural alloy-steel sheet and strip. Alloy steel is furnished to chemical composition requirements and is...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1965. Last previous edition approved in 2001 as A 524 – 96 (2001). 8 p. This specification covers seamless carbon steel pipe intended primarily for service at atmospheric and lower temperatures, NPS 1⁄8 to 26 inclusive, with nominal (average)...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1964. Last previous edition approved in 2001 as A 523 – 96 (2001). 5 p. This specification covers seamless and electricresistance-welded steel pipe used as conduit for the installation of high-pressure pipe-type electrical cables in NPS 4 to NPS...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2007. Published April 2007. Originally approved in 1964. Last previous edition approved in 2006 as A 522/A 522M – 06. 4 p. This specification covers 8 and 9 % nickel-alloy steel forged or rolled flanges, fittings, valves, and parts intended for use in welded pressure vessels for low-temperature...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1964. Last previous edition approved in 2005 as A 512 – 96 (2005). 7 p. This specification covers cold-drawn buttweld carbon steel tubes for use as mechanical tubing. This specification covers round, square, rectangular, and special shape...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1977. Last previous edition approved in 2003 as A 510M – 03. 7 p. This specification covers general requirements for carbon steel wire rods and uncoated coarse round wire in coils or straightened and cut lengths.
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2007. Published September 2007. Originally approved in 1964. Last previous edition approved in 2006 as A 510 – 06.7 p. This specification covers general requirements for carbon steel wire rods and uncoated coarse round wire in coils or straightened and cut lengths.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1964. Last previous edition approved in 2005 as A 508/A 508M – 05a. 9 p. This specification covers quenched and tempered vacuum-treated carbon and alloy steel forgings for pressure vessels such as those used in reactor systems. Specifically, it...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1964. Last previous edition approved in 2005 as A 507 – 05. 4 p. This specification covers hot-rolled and cold-rolled drawing alloy-steel sheet and strip. Material of this quality is produced principally for applications involving severe cold...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2005. Published March 2005. Originally approved in 1964. Last previous edition approved in 2000 as A 505 – 00. 11 p. This specification covers a group of common requirements that, unless otherwise specified in the material specification, apply to hot-rolled and cold-rolled alloy steel sheet and...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published April 2006. Originally approved in 1964. Last previous edition approved in 2001 as A 503/A 503M – 01 (2001). 3 p. This is an acceptance specification for the ultrasonic inspection of forged steel crankshafts having main bearing journals or crankpins 4 in. [100 mm] or larger in...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1963. Last previous edition approved in 2004 as A 498 – 04. 3 p. This specification covers external helical, integral
finned, seamless or welded low-carbon steel tubes for use in tubular heat exchangers, surface condensers, evaporators,...
American Society for Testing and Materials (ASTM). Current edition approved Aug. 1, 2006. Published August 2006. Originally approved in 1964. Last previous edition approved in 2004 as A 490 – 04a. 6 p. This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1963. Last previous edition approved in 2006 as A 484/A 484M – 06a. 13 p. This specification covers general requirements that shall apply to wrought stainless steel bars, shapes, forgings, and billets or other semi-finished material (except wire)...
American Society for Testing and Materials (ASTM). Current edition approved June 15, 2006. Published July 2006. Originally approved in 1962. Last previous edition approved in 2006 as A 479/A 479M – 06. 7 p. This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and...
American Society for Testing and Materials (ASTM). Current edition approved June 15, 2006. Published June 2006. Originally approved in 1962. Last previous edition approved in 2005 as A 471 – 05. 6 p. This specification covers vacuum-treated alloy steel forgings intended for use as turbine rotor disks and wheels. The values stated in inch-pound units are to be regarded as standard.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published May 2006. Originally approved in 1964. Last previous edition approved in 2001 as A 467/A 467M – 01. 4 p. This specification covers welded carbon steel machine chain and coil chain. Although these chains are not intended for pocket wheel use, they can be used for pocket and sprocket...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1961. Last previous edition approved in 2002 as A 451/A 451M – 02. 4 p. This specification2 covers austenitic alloy steel pipe for use in high-temperature, corrosive, or nuclear pressure service. Several grades of austenitic stainless steel...
American Society for Testing and Materials (ASTM). Current edition approved Aug. 1, 2007. Published August 2007. Originally approved in 1963. Last previous edition approved in 2007 as A 449 – 07a. 8 p. This specification covers quenched and tempered steel hex cap screws, bolts, and studs having a minimum tensile strength of 120 ksi for diameters 1.0 in. and smaller; 105 ksi for...