American Society for Testing and Materials (ASTM). Current edition approved July 1, 2008. Published July 2008. Originally approved in 1999. Last previous edition approved in 2001 as E2018 – 01. 25 p. The purpose of this guide is to define good commercial and customary practice in the United States of America for conducting a baseline property condition assessment (PCA) of the...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2009. Published May 2009. Originally approved in 1999. Last previous edition approved in 2008 as E1996 – 08. 13 p. This specification covers exterior windows, glazed curtain walls, doors, and impact protective systems used in buildings located in geographic regions that are prone to hurricanes....
American Society for Testing and Materials (ASTM). Current edition approved June 15, 2011. Published July 2011. Originally approved in 1997. Last previous edition approved in 2002 as E1903 – 97 (2002). 21 p. This practice covers a process for conducting a Phase II environmental site assessment (ESA) of a parcel of property with respect to the presence or the likely presence of...
American Society for Testing and Materials (ASTM). Current edition approved Jan. 1, 2005. Published January 2005. Originally approved in 1997. Last previous edition approved in 2004 as E 1886 – 04a. 8 p. This test method covers the performance of exterior windows, curtain walls, doors, and impact protective systems impacted by missile(s) and subsequently subjected to cyclic static...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2010. Published March 2011. Originally approved in 1997. Last previous edition approved in 2002 as E 1862 – 97 (2002). 1 p. This practice covers procedures for measuring and compensating for reflected temperature when measuring the surface temperature of a specimen with an infrared imaging...
American Society for Testing and Materials (ASTM). Current edition approved December 1, 2011. Published March 2012. Originally approved in 1993. Last previous edition approved in 2006 as E 1353 – 00 (2006). 1 p. This test method covers the determination of the noise equivalent temperature difference (NETD; NE[delta]T) of thermal imaging systems of the conventional forward-looking...
American Society for Testing and Materials (ASTM). Curent edition approved Jan. 15, 2014. Published February 2014. Originally approved in 1993. Last previous edition approved in 2006 as E1528– 06. 27 p. Purpose—The purpose of this practice is to define a good practice in the United States of America for conducting a transaction screen for a parcel of commercial real estate where...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2013. Published November 2013. Originally approved in 1993. Last previous edition approved in 2005 as E1527 – 05. 47 p. The purpose of this practice is to define good commercial and customary practice in the United States of America for conducting an environmental site assessment of a parcel of...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2010. Published November 2010. Originally approved in 1989. Last previous edition approved in 2004 as E 1311 – 89 (2004). 1 p. This test method covers the determination of the minimum detectable temperature difference (MDTD) capability of a compound observer-thermal imaging system as a function of...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2009. Published March 2009. Originally approved in 1987. Last previous edition approved in 2002 as E 1213 – 97 (2002). 1 p. This test method covers the determination of the minimum resolvable temperature difference (MRTD) capability of the compound observer-thermal imaging system as a function of...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2005. Published April 2005. Originally approved in 1971. Last previous edition approved in 2005 as E 336 – 05. 11 p. The sound isolation between two spaces in a building is determined by a combination of the direct transmission through the nominally separating building element (as normally...
American Society for Testing and Materials (ASTM). Current edition approved July 15, 2005. Published August 2005. Originally approved in 1967. Last previous edition approved in 2005 as E 329 – 05. 9 p. This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory personnel, or both, and the minimum technical requirements for...
Москва, Стандартинформ. 2013. Межгосударственный стандарт. Дата введения – 2014-01-01. 50 стр. Стандарт устанавливает требования при проектировании, изготовлении и контроле качества оборудования для спускоподъемных операций, выполняемых при бурении и эксплуатации нефтяных и газовых скважин.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2010. Published June 2010. Originally approved in 1924. Last previous edition approved in 2008 as E10 – 08. 32 p. This test method covers the determination of the Brinell hardness of metallic materials by the Brinell indentation hardness principle. This standard provides the requirements for a...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2010. Published May 2010. Originally approved in 1993. Last previous edition approved in 2005 as A922-05. 2p. This specification covers several grades of silicon metal. The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1991. Last previous edition approved in 2001 as D 5199 – 01. 4 p. This test method is limited to measuring the nominal thickness of geotextiles, smooth surfaced geomembranes, geonets, and geocomposite drainage products.
American Society for Testing and Materials (ASTM). Current edition approved Jan. 1, 2006. Published January 2006. Originally approved in 1994. Last previous edition approved in 1998 as D 5602 – 98. 3 p. This test method covers evaluation of the maximum static puncture load that roofing membrane samples can withstand without allowing the passage of water. This laboratory test is...
ASTM D 4833 – 07 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2007. Published January 2008. Originally approved in 1988. Last previous edition approved in 2000 as D 4833 – 00. 4 p. This test method is used to measure the index puncture resistance of...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2008. Published March 2008. Originally approved in 1987. Last previous edition approved in 2004 as D4637 – 04. 4 p. This specification covers flexible sheet made from ethylene-propylene-diene terpolymer (EPDM) intended for use in single-ply roofing membranes exposed to the weather. The tests and...
American Society for Testing and Materials (ASTM). Current edition approved July 1, 2008. Published May 1991. Originally approved in 1991. Last previous edition approved in 2003 as D4632 – 91(2003). 4 p. This test method is an index test which provides a procedure for determining the breaking load (grab strength) and elongation (grab elongation) of geotextiles using the grab...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 15, 2008. Published September 2008. Originally approved in 1982. Last previous edition approved in 2001 as D 4066 - 01a. 19 p. This classification system covers nylon materials suitable for injection molding and extrusion. Some of these compositions are also suitable for compression molding and...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2006. Published November 2006. Originally approved in 1979. Last previous edition approved 2004 as D 3754 – 04. 14 p. This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), for use in pressure systems for conveying sanitary sewage, storm water, and many...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2011. Published February 2011. Originally approved in 1968. Last previous edition approved in 2003 as D 2729 – 03. 5 p. This specification covers requirements and test methods for materials, dimensions, workmanship, chemical resistance, and joint tightness of poly (vinyl chloride) (PVC) sewer and...
American Society for Testing and Materials (ASTM). Current edition approved Aug. 1, 2012. Published December 2012. Originally approved in 1966. Last previous edition approved in 2009 as D2564 – 04(2009). 5 p. This specifcation covers requirements for poly(vinyl chloride) (PVC) solvent cements to be used in joining poly(vinyl chloride) piping systems. These solvent cements are...
American Society for Testing and Materials (ASTM). Current edition approved July 15, 2008. Published July 2008. Originally approved in 1965. Last previous edition approved in 2002 as D 2412 – 02. 6 p. This test method covers the determination of load-deflection characteristics of plastic pipe under parallel-plate loading. This test method covers thermoplastic resin pipe,...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1962. Last previous edition approved in 2000 as D 2137–94(2000). These test methods cover the determination of the lowest temperature at which rubber vulcanizates and rubbercoated fabrics will not exhibit fractures or coating cracks when...
American Society for Testing and Materials (ASTM). Current edition approved April 1, 2012. Published May 2012. Originally approved in 1960. Last previous edition approved in 2006 as D 1785 – 06. 11 p. This specification covers poly(vinyl chloride) (PVC) pipe made in Schedule 40, 80, and 120 sizes and pressure-rated for water (see Appendix X1). Included are criteria for classifying...
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2007. Published March 2007. Originally approved in 1952. Last previous edition approved in 2002 as D 1204 - 02. 2 p. This test method covers the measurement of changes in linear dimensions of nonrigid thermoplastic sheeting or film that result from exposure of the material to specified conditions...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published May 2006. Originally approved in 1951. Last previous edition approved in 2001 as D 816 – 82 (2001). 6 p. These test methods cover tests to measure the properties of adhesives, commonly called rubber cements, that may be applied in plastic or fluid form and that are manufactured from...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2006. Published May 2006. Originally approved in 1943. Last previous edition approved in 2000 as D 751 – 00. 19 p. These test methods cover, but are not limited to, rubber-coated fabrics, that is, tarpaulins, rainwear, and similar products. The scope of each of these test methods appears in the...
American Society for Testing and Materials (ASTM). Current edition approved May 15, 2007. Published June 2007. Originally approved in 1925. Last previous edition approved in 2005 as D257 – 99(2005). 18 p. These test methods cover direct-current procedures for the measurement of dc insulation resistance, volume resistance, and surface resistance. From such measurements and the...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 2002. Last previous edition approved in 2002 as B 924 - 02. 5 p. This specification describes seamless and welded nickel alloy tubing on which the external or internal surface, or both, has been modified by a cold forming process to produce an...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 2001. Last previous edition approved in 2001 as B 920 - 01. 4 p. This test practice covers equipment and methods for revealing the porosity of gold and palladium coatings, particularly electrodeposits and clad metals used on electrical...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published November 2006. Originally approved in 2001. Last previous edition approved in 2001 as B 919 – 01. 7 p. This specification establishes the requirements for welded, internally enhanced copper tube, in straight lengths or coils, suitable for use in refrigeration and air conditioning...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 2000. Last previous edition approved in 2000 as B 913 – 00. 5 p. This test method establishes the requirements for a standardized method of evaluating the quality of crimped-type electrical connections to solid or stranded conductors. This test...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published December 2005. Originally approved in 2000. Last previous edition approved in 2004 as B 907 – 04. 6 p. This specification covers solder metal alloys (commonly known as soft solders), including zinc-aluminum, zincaluminum-copper, zinc-tin, zinc-tin-copper, zinc-cadmium-tin,...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 2000. Last previous edition approved in 2002 as B 906 - 02. 16 p. This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled nickel...
American Society for Testing and Materials (ASTM). Current edition approved Mar. 1, 2005. Published March 2005. Originally approved in 2000. Last previous edition approved in 2000 as B903–00. 5 p. This specification establishes the requirements for seamless, internally enhanced copper tube, in straight lengths or coils, suitable for use in refrigeration and air-conditioning...
ASTM B 899 – 06 Standard Terminology Relating to Non-ferrous Metals and Alloys American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 1999. Last previous edition approved in 2005 as B 899 – 05. 7 p. To promote precise understanding and interpretation of standards, reports, and other technical...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1999. Last previous edition approved in 1999 as B 898 – 99. 7 p. This specification covers plate consisting of a base metal to which is bonded, integrally and continuously, on one or both sides a layer of one of the following: titanium, zirconium,...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1999. Last previous edition approved in 1999 as B 896 - 99. 6 p. These test methods define procedures for the relative characterization of conductor material connectability on the basis of measurements of parameters important to the design and...
American Society for Testing and Materials (ASTM). Current edition approved March 15, 2006. Published March 2006. Originally approved in 1998. Last previous edition approved in 2004 as B 888 – 04. 13 p. This specification establishes the requirements for copper alloy strip for use in the manufacture of electrical connectors or spring contacts produced from one of the following...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1997. Last previous edition approved in 2001 as B 884 - 01. 6 p. This specification covers niobium-titanium alloy billets, bars, and rods, at 46 to 48 % titanium. This material is used in the manufacture of wire for superconducting applications
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1997. Last previous edition approved in 2000 as B 882 – 00. 4 p. This specification covers the establishment of the requirements for pre-patinated (artificially aged) copper sheet and strip in ounce-weight thicknesses supplied in flat lengths for...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1996. Last previous edition approved in 2003 as B 872 – 96 (2003). 7 p. This specification covers rolled precipitation hardenable nickel-iron-chromium-columbium (Nb)-titanium-aluminum alloy (N09908) plate, sheet, and strip in the annealed...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1995. Last previous edition approved in 2006 as B 863 – 06. 6 p. This specification covers the requirements for 38 grades of titanium and titanium alloy wire
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published October 2006. Originally approved in 1995. Last previous edition approved in 2006 as B 862 – 06a. 9 p. This specification covers the requirements for 33 grades of titanium and titanium alloy welded pipe intended for general corrosion resisting and elevated temperature service.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1995. Last previous edition approved in 2006 as B 861 – 06. 8 p. This specification covers the requirements for 34 grades of titanium and titanium alloy seamless pipe intended for general corrosion resisting and elevated temperature service.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published December 2005. Originally approved in 1995. Last previous edition approved in 2002 as B 860 - 02. 3 p. This specification covers zinc master alloys which are used in hot dip galvanizing for the purpose of adjusting the concentration of certain alloying elements in the molten zinc...
American Society for Testing and Materials (ASTM). Current edition approved March 15, 2006. Published March 2006. Originally approved in 1995. Last previous edition approved in 2001 as B 858 – 01. 4 p. This test method describes a procedure to determine the presence of residual stresses in wrought copper alloy products that may lead to stress corrosion cracking. An ammonia vapor...