American Society for Testing and Materials (ASTM). Current edition approved Nov. 15, 2006. Published December 2006. Originally approved in 1993. Last previous edition approved in 2006 as B 846 – 06. 13 p. The terms defined in this terminology standard are applicable to copper and copper alloy products specifications, test methods, practices, and other documents within the...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1993. Last previous edition approved in 2005 as B 833 - 05. 5 p. This specification covers zinc and zinc alloy wire used to deposit zinc coatings by thermal spraying (metallizing) for the corrosion protection of steel and iron. Zinc and zinc...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1992. Last previous edition approved in 2003 as B 827 - 97 (2003). 9 p. This practice provides procedures for conducting environmental tests involving exposures to controlled quantities of corrosive gas mixtures. This practice provides for the...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 1991. Last previous edition approved in 2002 as B 815 – 02. 3 p. This specification covers cobalt-chromium-nickel-molybdenum-tungsten alloy UNS R31233 in the form of rod for wear applications and general corrosion service.
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1991. Last previous edition approved in 2002 as B 814 – 02. 3 p. This specification covers nickel-chromium-iron-molybdenum-tungsten alloy UNS N06920 in the form of rolled plate, sheet, and strip for general corrosion service.
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 1991. Last previous edition approved in 2001 as B 810 – 01a. 6 p. This test method covers the calibration of atmospheric corrosion test chambers for electrical contacts that produce an adherent film of corrosion product on copper, such as a test...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1997. Last previous edition approved in 2003 as B 808 – 97 (2003). 4 p. This test method monitors the reactivity of a gaseous test environment in which metal surfaces (for example, electrical contacts, assembled printed wiring boards, and so forth)...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1990. Last previous edition approved in 2005 as B 806 – 05. 3 p. This specification establishes requirements for copper alloy permanent mold castings for general applications. Nominal compositions of the alloys under this specification are shown...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1990. Last previous edition approved in 2002 as B 805 – 02. 7 p. This specification covers nickel alloys UNS N07716, N07725, N07773, N07776, N09777, and N09925 in the form of hot or cold finished rounds, squares, hexagons, rectangles, and cold...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1988. Last previous edition approve in 2000 as B 799 – 95 (2000). 4 p. This test method covers equipment and methods for determining the porosity of gold and palladium coatings, particularly electrodeposits and clad metals used on electrical...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1988. Last previous edition approved in 2000 as B 798 – 95 (2000). 6 p. This test method covers equipment and techniques for determining porosity in noble metal coatings, particularly electrodeposits and clad metals used on electrical contacts.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1988. Last previous edition approved in 2001 as B 792 – 01. 3 p. This specification covers commercial zinc alloys in ingot form for remelting for the manufacture of castings from the alloys as specified and designated as shown in Table 1.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1987. Last previous edition approved in 1999 as B 781 – 93a (1999). 5 p. This guide provides guidelines for users and manufacturers of silver-cadmium oxide material produced in strip, rod, wire, and part form for electrical contact applications.
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1987. Last previous edition approved in 2001 as B 776 – 01a. 9 p. This specification covers two grades of wrought hafnium and hafnium alloy strip, sheet, and plate as follows: 1 Grade R1 for nuclear applications, and 2 Grade R3 for...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1987. Last previous edition approved in 2000 as B 774 - 00. 4 p. This specification covers low-melting point metal alloys and soldiers, including bismuth–tin, bismuth–lead, bismuth–tin–lead, bismuth–tin–lead–cadmium,...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published May 2005. Originally approved in 1987. Last previous edition approved in 2002 as B 770 – 02. 5 p. This specification establishes requirements for copper-beryllium alloy sand castings for general applications and nominal compositions alloys defined by this specification are shown in...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1986. Last previous edition approved in 2000 as B 759 - 00. 3 p. This specification2 cover nickel-chromium-molybdenum-tungsten alloys (UNS N06110) in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1. Hot-worked...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1986. Last previous edition approved in 2000 B 758 – 00. 4 p. This specification covers welded UNS N06110 tube in the annealed condition (temper) for general corrosion applications. This specification covers outside diameter and nominal wall...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1990. Last previous edition approved in 2000 as B 757 - 00. 5 p. This specification covers welded UNS N06110 pipe in the annealed condition (temper) for general corrosion applications. This specification covers pipe sizes in schedules shown in...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1986. Last previous edition approved in 2000 as B 756 – 00. 5 p. This specification covers nickel-chromium-molybdenum-tungsten (UNS N06110) in the form of hot-worked rod and bar and cold-worked rod in the conditions shown in Table 1.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1986. Last previous edition approved in 2000 as B 755 – 00. 7 p. This specification covers rolled nickel-chromium-molybdenum-tungsten alloys (UNS N06110) plate, sheet, and strip.
American Society for Testing and Materials (ASTM). Current edition approved March 1, 2006. Published March 2006. Originally approved in 1985. Last previous edition approved in 2001 as B 752 – 01. 4 p. This specification covers zirconium and zirconium-alloy castings for general corrosion-resistant and industrial applications.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1985. Last previous edition approved in 2000 as B 743 – 00. 6 p. This specification establishes the requirements for seamless copper tube in coils, suitable for use in refrigeration and air conditioning or other uses, such as oil lines and...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1985. Last previous edition approved in 2000 as B 742 – 90 (2000). 3 p. This specification covers fine silver grade 99.9 % in fabricated form. The forms covered are tubing, rod, wire, strip, and sheet for electrical contact applications.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1984. Last previous edition approved in 2001 as B 737 – 01. 4 p. This specification covers hot- or cold-worked hafnium rod and wire, or both. This specification contains two material grades, one specifically for nuclear applications (Grade R1) and...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 1984. Last previous edition approved in 2005 as B 735 – 05. 4 p. This test method covers equipment and procedures for using nitric acid vapor for determining porosity in gold coatings, greater than 0.6 μm (25 μin.) in thickness, particularly...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1996. Last previous edition approved in 2001 as B 731 – 96 (2001). 2 p. This specification covers 60 % palladium-40 % silver rod, wire, strip, and sheet material for electrical contacts.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published December 2005. Originally approved in 1984. Last previous edition approved in 2000 as B 729 – 00. 3 p. This specification covers UNS N08020, UNS N08026, and UNS N08024 seamless, cold-worked or hot finished pipe and tube intended for general corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 1983. Last previous edition approved in 2002 as B 726 – 02. 2 p. This specification covers alloy UNS N06333 in the form of welded tube intended for heat-resisting applications and general corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1983. Last previous edition approved in 2003 as B 725 – 93 (2003). 6 p. This specification covers nickel (UNS N02200) and low carbon nickel (UNS N02201 and UNS N04400) in the form of welded and annealed or welded and stress relieved pipe intended for...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published May 2005. Originally approved in 1983. Last previous edition approved in 2000 as B 723 – 00. 3 p. This specification covers wrought alloy UNS N06333 in the form of welded pipe intended for heat-resisting applications and general corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1983. Last previous edition approved in 2002 as B 722 - 02. 2 p. This specification covers alloy N06333 in the form of hot-finished and cold-finished seamless pipe and tube intended for heat-resisting applications and general corrosive service....
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published May 2005. Originally approved in 1983. Last previous edition approved in 2000 as B 719 - 00. 5 p. This specification covers wrought alloy UNS N06333 in the form of hot-finished and cold-finished bars and flats intended for heat resisting applications and general corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1983. Last previous edition approved in 2000 as B 718 – 00. 8 p. This specification covers wrought alloy UNS N06333 plate, sheet, and strip intended for heat resisting applications and general corrosive service. The values stated in inch-pound...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1983. Last previous edition approved in 2000 as B 717 – 96 (2000). 2 p. This specification covers refined ruthenium as sponge and powder in one grade as follows: 1 Grade 99.80—Ruthenium having a purity of 99.80 %. 2 Grade 99.90—Ruthenium having a...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1982. Last previous edition approved in 1999 as B 712 – 93 (1999). 2 p. This guide describes procedures for use in conducting analysis of silver-cadmium oxide materials for sodium and potassium content. The exact methods for the performance of this...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1982. Last previous edition approved in 2001 as B 708 – 01. 7 p. This specification covers unalloyed and alloyed tantalum plate, sheet, and strip as follows: 1 R05200, unalloyed tantalum, electron-beam furnace or vacuum-arc melt, or both, 2...
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1982. Withdrawn Dec. 15, 1993. Reinstated March 10, 2000. Last previous edition approved in 2000 as B 706 – 00. 7 p. This specification establishes the requirements for copper alloy UNS No. C69100 seamless pipe in standard pipe sizes, both...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1982. Last previous edition approved in 2003 as B 705 – 03. 3 p. This specification covers welded UNS N06625, UNS N06219 and UNS N08825 pipe in the annealed condition (temper) for general corrosion applications. This specification covers pipe...
Москва, Издательство: НАКС ( Национальное агентство контроля сварки), 2002г. 10 стр. Предлагаемый тест " 0.01.1.01.ОЭ(м)-I Общий экзамен 1 уровень" создан на основе базы знаний "Общий экзамен", состоящей из 117 вопросов. Вопросы тестовой базы знаний подразделяются на следующие группы: Тема: Вопр_ОЭ/1 Вопр_ОЭ/2 Вопр_ОЭ/3 Правила устройства электроустановок Правила эксплуатации...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1981. Last previous edition approved in 2001 as B 693 – 91 (2001). 3 p. This specification covers electrical contact components made from silver nickel by powder metallurgical procedures. This specification covers compositions within the...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1981. Last previous edition approved in 2000 as B 692 – 90 (2000). 2 p. This specification defines the criteria for composition and other requirements for brushes with a nominal silver content of 75 weight % with the balance being substantially...
American Society for Testing and Materials (ASTM). Current edition approved Mar. 1, 2005. Published March 2005. Originally approved in 1981. Last previous edition approved in 1999 as B 687 – 99. 6 p. This specification establishes the requirements for brass and copper pipe nipples in standard pipe sizes from 1⁄8 to 8 in., inclusive, in standard lengths, and chromium-plated pipe...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1981. Last previous edition approved in 2001 as B 685 – 01. 2 p. This specification covers a 60 % palladium-40 % copper alloy in the form of rod, wire, strip, and sheet material for electrical contacts.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1980. Last previous edition approved in 2001 as B 683 – 01. 2 p. This specification covers palladium in the form of rod, wire, strip, and sheet material for electrical contacts. The values stated in inch-pound units are to be regarded as the...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2005. Published July 2005. Originally approved in 1980. Last previous edition approved in 2004 as B 677 – 04a. 3 p. This specification covers UNS N08925, UNS N08354, and UNS N08926 seamless, cold-worked or hot-finished pipe and tube intended for general corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2005. Published July 2005. Originally approved in 1980. Last previous edition approved in 2004 as B 674 – 04. 2 p. This specification covers UNS N08925, UNS N08354, and UNS N08926 welded tube for general corrosion applications. This specification covers outside diameter and nominal wall tube....
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2005. Published July 2005. Originally approved in 1980. Last previous edition approved in 2004 as B 673 – 04. 3 p. This specification covers UNS N08925, UNS N08354, and UNS N08926 welded pipe for general corrosion applications. This specification covers pipe sizes in schedules shown in Table 1
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1980. Last previous edition approved in 1999 as B 671 – 81 (1999). 2 p. This specification covers refined iridium as sponge and powder in two grades as follows: 1 Grade 99.80 (UNS PO6100)— Iridium having a 2 Grade 99.90— Iridium having a purity of...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1980. Last previous edition approved in 2000 as B 668 – 00. 2 p. This specification covers UNS N08028 seamless cold-finished or hot finished pipe and tube intended for general corrosive service. The general requirements are covered in...